Save. Share. Connect.
Thursday, September 29, 2016
VOLUME -27 NUMBER 5
Publication Date: 05/1/2012
Front Page News
People in the News
Electronic Mfg. Services
Electronic Mfg. Products
Special Features: Components and Distribution
Multi Tradeshow Product Preview
May 2012 Issue
Add Message Board
New Self-Clinching Thru-hole Standoffs from PEM
Self-clinching thru-hole unthreaded standoff fasteners.
Danboro, PA — New from PennEngineering are self-clinching thru-hole unthreaded standoff fasteners that provide exact spacing between two panels in an assembly. These fasteners install permanently and securely in steel, stainless steel, or aluminum sheets as thin as 0.040-in. (1mm) to achieve specified panel-spacing needs using minimal hardware.
These self-clinching thru-hole unthreaded standoffs are available in a selection of materials including steel (Type SO), stainless steel (Type SOS), or aluminum (Type SOA). All can be ordered in lengths ranging from 0.125 to 7.50-in. (3 to 20mm).
The standoffs install quickly and easily using a PEMSERTER or other standard press by first inserting the fastener into a properly sized round mounting hole in the metal sheet and into the press anvil. With punch and anvil surfaces parallel, sufficiently applied squeezing force embeds the standoff's head flush in the sheet and the fastener is permanently installed without risk of loosening or falling out. No other hardware is necessary to accomplish the required spacing function. The fasteners are RoHS-compliant.
Contact: PennEngineering, 5190 Old Easton Road, Danboro, PA 18916-1000.
800-237-4736 or 215-766-8853 fax: 215-766-0143 Web:
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | firstname.lastname@example.org
powered by GIM