Wednesday, September 28, 2016
VOLUME -27 NUMBER 5
Publication Date: 05/1/2012
Advertisements
Archive >  May 2012 Issue >  Multi Tradeshow Product Preview > 

TE Circuit Protection MHP Now Offers Smart Activation Feature
Smart activation circuit.
Menlo Park, CA — TE Circuit Protection, a business unit of TE Connectivity, has introduced a new Metal Hybrid PPTC (MHP) device offering Smart Activation (SA) functionality. The MHP-SA device provides a resettable, cost-effective and space-saving alternative to typical methods of protecting high-power lithium battery and module applications. These include cordless power tools, e-scooters and light electric vehicles (LEVs) and standby power and energy storage systems (ESSs).

The new MHP-SA device helps provide overcharge protection in large multi-cell battery packs and modules in which circuit protection devices interface with electronics as part of a sophisticated battery management system. The MHP-SA device's Smart Activation design feature accomplishes this through a third terminal signal line that enables external activation.

In a typical scenario, an IC monitors the battery system's temperature, current and voltage and, if an abnormality is detected, it switches on a FET and activates the heater element (PPTC) of the MHP-SA device to heat the bimetal. The bimetal contacts then open and cut contact to the main line. The first in a series of planned devices, the new MHP-SA50-400-M5 device has a 50A/400VDC maximum rating and its hold current is 50A on the main line. The device can be activated electronically with as little as 3A on the signal line. MHP Technology utilizes a hybrid circuit protection approach, combining a bimetal protector in parallel with a polymeric positive temperature coefficient (PPTC) device.

Resettable MHP technology offers excellent arc suppression characteristics and also offers a smaller size and thinner form factor compared to larger DC fuses or other protection devices. The MHP-SA device helps save design costs due to its ability to employ a low-power switch to open the main line, enabling lower-cost FETs to be installed. And because the MHP-SA device is resettable there is no need to overrate for inrush currents. In some cases, designers can replace larger, higher-cost DC fuses with an MHP-SA device.

Contact: TE Connectivity, P.O. Box 3608, MS 38-41, Harrisburg, PA 17105-3608 800-522-6752 or 215-657-6202 E-mail: newproducts@tycoelectronics.com Web:
http://www.te.com


Add your comment:

Full Name:
E-mail:
Subject:
Comment:
 

 
 
search login