Save. Share. Connect.
Friday, September 30, 2016
VOLUME - NUMBER
Switches & Relays
Add Message Board
Haydon Kerk Offers Size 17 Actuator Replacement
Waterbury, CT — Haydon Kerk Motion Solutions has released a new version of the popular 36mm G4 linear actuator. This configuration includes a special adapter plate that allows the smaller 36mm OD unit to replace existing size 17 hybrid stepper motor linear actuators.
The new linear actuator's performance not only exceeds the performance of comparable size can stack actuators, but also meets the performance of the larger hybrid size 17 single stack actuators. The 36mm unit with the integrated size 17 adapter plate easily replaces existing hybrid units by using the same bolt pattern and pilot surface.
As long as the higher step resolution of the hybrid style actuators is not required for the application, the 36mm can-stack with the size 17 adapter plate provides the performance and life of the more expensive size 17 units. Force output range of the G4 36mm can stack is from 70N to 260N (16-lb. to 58-lb.). Output resolution ranges from 0.013 to 0.102mm (0.0005 to 0.004-in.) per step command. The G4 linear actuator architecture uses the latest technologies to extend reliability and meet higher performance requirements. The design utilizes optimized teeth geometry along with high-energy neodymium magnets that result in a higher continuous force output in a small package. With 20 percent higher output force across the entire speed range, compared with other designs of similar size, the G4 also contains the latest custom-engineered plastics and larger bearings for greater rotor support and higher axial load capability. The new actuator is suitable for applications that include medical equipment, bar code scanning devices, printing equipment, laboratory instrumentation and other mechanisms requiring high force in a small package. As with other Hayden stepper motor linear actuators, there are three configurations available: Captive, Non-Captive, and External Linear.
Contact: Haydon Kerk, 1500 Meriden Rd., Waterbury, CT 06705
800-243-2715 or 203-756-7441 fax: 203-756-8724 E-mail: info@HaydonKerk.com Web:
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | firstname.lastname@example.org
powered by GIM