Save. Share. Connect.
Tuesday, July 26, 2016
VOLUME - NUMBER
Switches & Relays
HOME / CURRENT ISSUE
Add Message Board
Tech-Etch: Photo Etching Beryllium Copper Components
Beryllium copper parts.
Plymouth, MA — Beryllium copper parts come in many shapes and sizes, and Tech-Etch is expert in the etching, forming, heat treating and finishing of beryllium copper. The mechanical and electrical properties of beryllium copper make it the material of choice for battery contacts, grounding clips, connector contacts, ESD clips and shielding gaskets.
The company's in-house tool and die department produces bending tools capable of forming intricate sharp bends in tempers from annealed to full hard. Component parts are then inert atmosphere heat-treated to enhance spring properties permitting greater deflection without compression set while achieving close dimensional control.
Finally, parts can be finished in an expansive plating department. Many finishes are available including tin, silver, zinc, sulfamate nickel, electroless nickel, palladium nickel and gold.
Contact: Tech-Etch, Inc., 45 Aldrin Road, Plymouth, MA 02360
508-747-0300 fax: 508-746-9639 Web:
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | firstname.lastname@example.org
powered by GIM