Tampa, FL — Speedprint Technology is introducing the SP710avi to the North American market with a clear bottom, demonstrating the system's design simplicity and ease of maintenance. The advanced screen printer was designed to cope with the rigors of high-volume SMT production while incorporating the flexibility needed in high-mix, quick product setup and changeover environments.
|SP 700 screen printer. |
The SP700avi becomes the SP710avi when it is equipped with the Automatic Dispense unit (ADu). The Dual Syringe, Automatic Dispense unit (ADu) allows users to eliminate additional capital outlay by integrating this functionally into the printer.
The ADu defines flexibility from its ease of programming through to calibration and cleaning. Utilizing the PCB Gerber file, an operator can simply drag any region of interest to automatically program volume deposits of paste or glue. There is no need to spend time on each deposit site adjusting to optimize the volume, point and drag. This means that a complete PCB can be programmed for a prototype in just seconds.
ADu will automatically calibrate the nozzle tip length, eliminating any operator errors. In addition, the unit can automatically map the height of the substrate, meaning that any substrate warpage is identified and appropriate adjustments are applied to ensure an optimized deposit. The solid-state linear encoders have an accuracy of 1µ. The unit can be fitted with any combination of paste and glue modules, each one utilizing precision steel augers to provide maximum control and lifespan.
Contact: Speedprint Technology Ltd., 5804 E. Breckenridge Blvd., Tampa, FL 33610 813-246-9500 fax: 813-246-9595 Web: http://www.speedprint-tech.com