Save. Share. Connect.
Tuesday, December 6, 2016
VOLUME - NUMBER
NEPCON South China '16
SEMICON West '16
Atlantic Design/ATX/MDM '16
NEPCON China,SMT/Hybrid Pkg,EDS,EWPTE '16
ATX/MDM West '16
productronica,The ASSEMBLY Show, IMAPS, MDM/Minneapolis '15
Nepcon South China '15
SEMICON West '15
ATX/MDM EAST '15
EDS, SMT/Hybrid Pkg,Wire Tech Expo '15
NEPCON China '15
ATX WEST/APEX '15
AATE and IPC MW 11
SMTAI, Autotest, ATX MW/MDM and Assembly '14
SEMICON West '13
Electronics West/MDM and IPC/APEX '13
SEMICON West '14
NEPCON China, SMT/Hybrid Pkg, EDS, NWPTE '14
IPC APEX '14
Electronics West/MDM 10
ATX Midwest, IMAPS, PCB West '13
ATX West '14
ATExpo & IPC MW 07
NEPCON China '13, EDS, more
SEMICON WEST/Intersolar '12
NEPCON China Product Preview '12
Atlantic Design/MDM 10
Electronics West/MDM 11
SEMICON WEST 10
Atlantic Design/MDM 11
ATLANTIC DESIGN & MFG '13
Atlantic Design/MDM 09
SEMICON WEST 08
NEPCON South China '13
ATExpo & IPC MW 08
Electronics West/MDM 08
NEPCON China Product Preview '13
Electronic West/MDM 09
SMTAI and productronica '13
Multi tradeshow Product Preview '12
AATE/IPC Midwest 10
Electronics West/MDM 12
ATE and IPC MW 09
SMTAI and productronica '13
Atlantic Design/MDM 08
Add Message Board
QC Industries Intros Angled Conveyors
Angled conveyor system.
Cincinnati, OH — QC Industries has added another component to its popular line of Automation Series Conveyors: AS40Z Angled Frame Conveyors. The new conveyors enable elevation changes that aren't possible with a flat conveyor.
The new conveyors feature the same 1.95-in. (49.5mm) high rigid aluminum frame offered in other Automation Series Conveyors. Its design resists twisting, which is a leading cause of belt tracking issues in competing conveyors.
The conveyors also incorporate the company's special Z-Track design to help make tracking simple. Optional V-Guide belts can assist in tracking, especially in hard-to-reach applications.
Like other Automation Series Conveyors, AS40Z conveyors include Tension Release Tails, which flip up at the push of a button to allow easy under-belt cleaning. They then click back into place with all tracking adjustments retained.
The reduced torque requirements for these conveyors allow the use of smaller motors than other angled frame conveyors, letting them fit into spaces other conveyors cannot. One such drive system is the brushless DC motor that affords high-tech control in a small package.
The conveyors are available in three configurations for any elevating or lowering application. The L is a horizontal to inclined configuration and the R is inclined to horizontal, while the Z is horizontal to inclined to horizontal. The three most popular angles — 30°, 45° and 60° — are available as standard, while others are available as special orders.
A wide variety of belt options are available, including those with cleats and corrugated sidewalls that help keep product contained on the belt. They can carry loads up to 120 lbs. (54.5kilos) and move at speeds up to 200 FPM (61m/minute). Widths are available from 8 to 24-in. (203 to 610mm) and lengths up to 20-ft. (6.1m).
The company's low profile belt conveyors are used in a wide variety of applications including packaging, automation, assembly, medical product and device manufacturing, and material handling, manufacturing.
Contact: QC Industries LLC, 4057 Clough Woods Drive, Cincinnati, OH 45103.
513-753-6000. E-mail: firstname.lastname@example.org Web:
See at Pacific Design/MDM West Booth #4439.
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | email@example.com
powered by GIM