Save. Share. Connect.
Saturday, September 24, 2016
VOLUME -27 NUMBER 2
Publication Date: 02/1/2012
Front Page News
People in the News
Electronic Mfg. Services
Electronic Mfg. Products
Special Features: Components and Distribution
Product Preview: Electronics West / MDM
February 2012 Issue
Add Message Board
Hi-Performance Clock Osc. from Crystek
SMT crystal clock oscillator.
Fort Myers, FL — Crystek Corporation has launched the CCHD-957, a new ultra-low phase noise HCMOS clock oscillator with standby mode, with an extremely low close-in phase noise of -100dBc/Hz at 10Hz offset and a typical noise floor of -170dBc/Hz at 100kHz offset. This performance makes the oscillator family an excellent choice for use in applications such as: DACs (digital-to-analog converters), ADCs (analog-to-digital converters), DAB (digital audio broadcasting), and professional CD audio equipment.
The oscillator also has a "Standby Function" — when placed in disable mode, the internal oscillator is completely shut down and its output buffer is placed in Tri-State. This oscillator family is housed in a 9 x 14mm SMT package and operates with a +3.3V power supply consuming 15mA of current. Stability is rated at 20 to 50ppm (0 to +70°C) and ±25-50ppm (-40 to +85°C).
The CCHD-957 generates frequencies between 10MHz and 50MHz. Its output driver is capable of driving ±24mA, translating to a rise/fall time of ~3nsec Max at 20 percent to 80 percent Vcc with a 15pF load.
Contact: Crystek Corporation, 12730 Commonwealth Drive, Ft. Myers, FL 33913
800-237-3061 or 239-561-3311 fax: 239-561-1025 E-mail: firstname.lastname@example.org Web: www.crystek.com
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | email@example.com
powered by GIM