Save. Share. Connect.
Tuesday, February 21, 2017
VOLUME -27 NUMBER 2
Publication Date: 02/1/2012
Front Page News
People in the News
Electronic Mfg. Services
Electronic Mfg. Products
Special Features: Components and Distribution
Product Preview: Electronics West / MDM
February 2012 Issue
Add Message Board
X-COM Intros 4-Channel Arbitrary Waveform Generator
Rack-mount arbitrary waveform sig gen.
Reston, VA — Newly introduced by X-COM Systems, LLC, subsidiary of Bird Technologies Group, the 4CH-VSG2000, which in the compact space of a 2U rack-mount enclosure combines four independently-programmable arbitrary waveform vector signal generators. Each generator has a dedicated removable 1-Tbyte solid-state drive for waveform storage. The instrument is an excellent choice for testing multi-receiver or MIMO-enabled systems that require generation and playback of broadband signals with user-definable waveform sequences that simulate signal environments a receiver will experience in service. Its small size makes it equally-suited for evaluating the performance of systems in the field, in R&D environments, or within a production-line ATE system, and dramatically reduces the equipment required for testing. The waveform sequences played back by the generator contain any number of waveform segments in any order that together form the output stream. The instrument can accept waveforms based on commercial wireless standards, custom waveforms used in defense systems, or any user-defined waveform sequence, whether recorded over the air or created in tools such as MATLAB, RFXpress from Tektronix, or X-COM's WaveCAFE software.
Each signal generator in the can independently play any sequence of waveforms up to 110 MHz in bandwidth over a frequency range of 50MHz to 2GHz. As the 4CH-VSG2000 can drive the input of a microwave or millimeter-wave upconverter, it can also be used to test systems that operate at much higher frequencies. In either case, once the user selects the center frequency, the VSG will provide an output centered at that frequency and extending up to 55MHz below and above it.
The instrument is extremely flexible, as its VSG outputs can be phase-locked, independently varied in phase, or operated completely independently of each other in phase and frequency. The VSG outputs can be at widely different frequencies or contiguous, providing a total bandwidth of 440 MHz, which makes the instrument an excellent choice for evaluating the performance of satellite communication transponders that cover very wide bandwidths.
The system stores waveforms on solid-state drives with maximum data rates of 600 Mbytes/s that can store from 22 to 66 min. of data depending on the selected sample rate. It provides both RF and I and Q outputs, an external trigger input, and an input for a precision external 10-MHz reference, and is supplied with the company's MCVSG control software that orchestrates all instrument functions and configuration as well as connections to external systems via Ethernet.
Contact: X-COM Systems, LLC, 12345-B Sunrise Valley Drive, Reston, VA 20191
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | firstname.lastname@example.org
powered by GIM