Save. Share. Connect.
Wednesday, October 26, 2016
VOLUME -26 NUMBER 12
Publication Date: 12/1/2011
Front Page News
People in the News
Electronic Mfg. Services
Electronic Mfg. Products
Special Features: Test and Measurement
Product Preview: productronica
December 2011 Issue
Add Message Board
Kwikmark: Automated Tag Marking System
Automated tag marking system.
McHenry, IL — The Kwikmark magazine tag transfer feeder has been developed to eliminate the problematic tag feeding issues of tags escaping from the bottom of a magazine. The unit feeds tags to the programmable marking station, which marks the tag and drops the finished item down a chute to a receiving container.
The system's design means it can easily handle unusually shaped tags and parts. Its vertical magazine "lifts" tags to the top. There are no escapements or "coin change" mechanisms to jam, and the machine accommodates tags with coarse cuts, bent edges, and thickness variations. Operation is not affected by weight of stack or near empty or full magazine, and the transfer system requires no track "width" guides or adjustments.
The machine easily handles thin tags; no "push" type escapement required. It will not scratch pre-printed tags from sharp or rough edges. The machine provides much faster changeover if using tags of different size and thickness, and no changeover tooling is needed.
The machine is available with Print Queue Driver, which allows multiple users to download job menus, variables, quantities, etc.
Contact: Kwik Mark, Inc., 4071 Albany St., McHenry, IL 60050
815-363-8268 fax: 815-363-8089 E-mail: firstname.lastname@example.org Web:
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | email@example.com
powered by GIM