Save. Share. Connect.
Monday, December 11, 2017
VOLUME -26 NUMBER 12
Publication Date: 12/1/2011
Front Page News
People in the News
Electronic Mfg. Services
Electronic Mfg. Products
Special Features: Test and Measurement
Product Preview: productronica
December 2011 Issue
Add Message Board
AKS Intros Plasma Plate & Tube Processing System
Plasma cutting system.
Cleveland, OH — AKS Cutting Systems has introduced a combination plate and tube processing system for plasma processing of both plates and tubes. Available on its popular accu-kut heavy duty unitized precision plasma plate cutting system, the tube processing center can perform plasma processing of tube and pipe.
Used in conjunction with the robo-kut plasma beveling head, the system can be used to plasma cut straight or bevel cuts in plate up to 2-in. (50.8mm) thick and also perform straight or bevel cutting on tubes and pipes in sizes from 2 to 6-in. (50.8 to 152.4mm) square, rectangular or round and up to 24-ft. (7.3m) long.
Compact, unitized, fully welded and machined design provides accuracy and superior motion performance producing best quality plasma cut parts. Changeover between plate and tube is seamless.
Contact: AKS Cutting Systems, 4905 Rocky River Drive, Cleveland, OH 44135
800-962-7803 or 216-267-1818 fax: 216-267-1850 E-mail: firstname.lastname@example.org Web:
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | email@example.com
powered by GIM