Sunday, August 28, 2016
Publication Date: 12/1/2011
ARCHIVE >  December 2011 Issue >  New Products > 
AC/DC LED Drivers from Aimtec

Vaudreuil-Dorion, Canada — Aimtec's second generation of AC/DC constant current LED drivers are available with an operating temperature range from -40 to +80°C, waterproof IP68 rated cases and designed to exceed the demands of today's most innovative LED luminary applications.
AKS Intros Plasma Plate & Tube Processing System

Cleveland, OH — AKS Cutting Systems has introduced a combination plate and tube processing system for plasma processing of both plates and tubes. Available on its popular accu-kut heavy duty unitized precision plasma plate cutting system, the tube processing center can perform plasma processing of ...
Easily Activated PB Switch from APEM

Haverhill, MA — APEM Components is introducing Controlmec, a five-position integrated switch solution. Designed for easy activation in indoor and non-dusty applications, Controlmec can be used to control a unit, navigate in a display, or to operate indoor auxiliary equipment on a vehicle or boat ...
B&R X20 System Certified for Maritime Use

Roswell, GA — The B&R X20 System has achieved the coveted seal of quality for maritime applications. The X20 System is both a complete control solution as well as a remote I/O system. Its innovative three-part modularity — bus module, electronics module and terminal block — allows for many ...
BEI Kimco: Challenging Motor Application

Vista, CA — BEI Kimco Magnetics, a company of Custom Sensors & Technologies (CST), Inc., recently met the challenging motor requirements for a special cutting tool. Key to the product's design specification was an Ingress Protection (IP) IP65 washdown rated motor that could operate under a continuous ...
Bentek: Utility-Scale Circuit Breaker Recombiner

San Jose, CA — Bentek Solar manufactures a range of PV products for connecting the PV panel to the inverter for the commercial and utility scale marketplace. The latest of these products is its new utility-scale 1MW 1000VDC circuit breaker recombiner.
Binder-USA Releases Adjustable Receptacles

Camarillo, CA — Binder-USA has introduced new receptacles with adjustable angular positions as part of the Series 713, 763, 715 and 766 automation product ranges. The panel-mounted receptacles can be rotated during installation to allow a right-angle cordset to connect in a desired angular position ...
Compact DSO from B&K Ups Performance and Value

Yorba Linda, CA — B&K Precision has replaced its model 2532 digital storage oscilloscope (DSO) with the 2532B 40MHz DSO. This new compact instrument offers basic measurement features with a 500MSa/s sampling rate, and improves upon the 2532 without compromising quality or cost. The new instrument ...
Bliley Intros First in New OCXO Series

Erie, PA — New from Bliley Technologies, Inc. is the Apollo OCXO series oscillator with exceptional phase-noise performance in a low profile, 1.0 x 1.0 x 0.460-in. (25.4 x 25.4 x 11.7mm) package. According to the company, the new oscillator provides excellent frequency versus temperature stability ...
Chassis-Mount DC/DC Converter from Calex

Concord, CA — Calex Mfg. Co., Inc. has introduced the QCM Chassis Mount Series of DC/DC converters. The QCM offers up to 75 Watts of output power in a rugged, encapsulated 2.65 x 4.2 x 1.0-in. (67.3 x 106.7 x 25.4mm) package.
Cognex: Checker Has More Tools, More Options

Natick, MA — Newly introduced by Cognex Corporation is a line of new position tools, colored lighting and filters, and a new sensor model, Checker® 4G7X, to expand the practical applications of its Checker 4G line of machine vision sensors.
Wideband VCO from Crystek

Fort Myers, FL — Crystek's CVCO55CW-1200-2100 VCO (Voltage Controlled Oscillator) operates from 1200MHz to 2100MHz with a control voltage range of 0.5V to 25V. This VCO has a typical phase noise of -95dBc/Hz at 10kHz offset and reportedly has excellent linearity. Output power is typically +6dBm ...
CW: Momentary Rocker Switch for Polarity Reversing

Southampton, PA — CW Industries has developed a momentary action full size reversing rocker switch that is available in DPDT Center-Off configuration. These switches are rated at 40Amps at 12VDC, feature self cleaning contacts and are RoHS-compliant.
Dynalab Intros Hipot Harness Tester

Reynoldsburg, OH — NX Hipot Wire Harness Testers capable of testing with either AC or DC voltage. The new AC/DC option extends the existing offering of DC-only NX Hipot Wire Harness Testers.
Arc Flash Control Safety Relay from Electroswitch

Weymouth, MA — A new Time Delay Control Switch Relay (TD-CSR) from Electroswitch provides a safe and effective means of mitigating arc flash danger in local circuit breaker operation by allowing for a manually initiated time-delayed trip or close. A flashing LED notifies the operator of the pending ...
Fujipoly: ELD Connectors for Today's Avionics

Carteret, NJ — Since the introduction of the "glass cockpit", commercial and military aircraft manufacturers have experienced significant demand for next-generation technology. In place of mechanical, analog and digital gauges, pilots now use a fully integrated navigation, communications and aircraft ...
Acu-Rite: Touch Screen CNC Mill Control

Schaumburg, IL — Acu-Rite's 3500i CNC control has been designed with innovative, operator-oriented enhancements that will facilitate an intuitive transition for customers to the next generation of control technology. Based on the Heidenhain NC kernel and processor technology, the 3500i provides a ...
IQD Launches High Spec AT-Cut Crystals

Somerset, UK — IQD Frequency Products has launched a new range of high specification crystals for specialist applications such as military, radar and pagers.
Ironwood: Test Socket Has Cooling Fan

Burnsville, MN — Ironwood Electronics has introduced a new high-performance BGA socket for 1mm pitch, 1760 pin BGA ICs. The SG-BGA-6348 socket is designed for 42.5 X 42.5mm package size and operates at bandwidths up to 8GHz with less than 1dB of insertion loss.
New Vertical Carousel from Kardex Remstar Saves Weight and Energy

Westbrook, ME — The Megamat RS Vertical Carousel from Kardex Remstar has been designed using construction and production techniques that focus on energy-saving and the environment. The result is a new vertical carousel that utilizes up to 40 percent less energy with a 50 percent unit weight reduction ...
search login