Saturday, September 24, 2016
VOLUME -26 NUMBER 12
Publication Date: 12/1/2011
Advertisements
Archive >  December 2011 Issue >  Electronic Mfg. Products > 
Absolute Turnkey Upgrades Line with DEK Horizon

Santa Clara, CA — Absolute Turnkey, an EMS provider, has purchased a DEK Horizon Screen Printer. The platform will provide the EMS company with absolute freedom of choice to configure its screen printer as needed. The DEK Horizon will be installed in Absolute Turnkey's Santa Clara, CA facility, where ...Read More
ACE: Automated Selective Soldering System

Spokane Valley, WA — ACE Production Technologies' KISS-103 is an automated, simple-to-use selective soldering machine using the company's proven "traveling mini solder wave". It eliminates the high labor cost of hand — soldering throughhole components on SMT boards without disturbing nearby SMT ...Read More
BPM: Fastest Programming Speeds

Houston, TX — BPM Microsystems has released BitBlast for 8th Generation and Flashstream® MK2 device programming solutions. BitBlast is a Vector Engine Co-Processor® enhancement that is able to achieve the fastest programming speeds for high-density managed NAND devices that utilize the eMMC interface.\par ...Read More
BTU Intros Metallization Firing System

North Billerica, MA — BTU International is introducing the TRITAN HV90 metallization firing system for silicon photovoltaics.
 
The new dual-lane metallization firing system provides increased throughput at 3600 wafers per hour, an edge belt, volatile organic compound (VOC) abatement and a single zone spike with less than 3 seconds spike time.
Read More
Chamberlain Group Acquires MUST III Solderability Tester

Chester, CT — The Chamberlain Group's Sonora, Mexico manufacturing facility has taken delivery of a MUST III Solderability Tester (wetting balance) made by GEN3. Ascentech LLC, the North American distributor for GEN3 Systems Ltd., installed the MUST III System — a wetting balance testing system ...Read More
CyberOptics Launches AOI Tabletop System

Minneapolis, MN — CyberOptics Corporation has introduced its QX100 AOI tabletop system equipped with next generation image analysis software, AI2 (Autonomous Image Interpretation). The new system embraces the company's special image acquisition solution using the Strobed Inspection Module (SIM) and is capable of inspecting 01005 components and larger at 100cm/sec ...
Read More
Goepel Demos IJTAG Support

Jena, Germany — Goepel electronic is introducing a prototype version of the company's JTAG/Boundary Scan software platform SYSTEM CASCON with integrated tools supporting the current version of the upcoming IEEE P1687 (IJTAG) standard. Read More
JNJ: IPA and IPA/DI Water Cleaning Wipes

Franklin, MA — JNJ Industries is packaging Isopropyl alcohol (IPA), a universal cleaning agent, in two different formulations and with two distinct wipe substrate materials so that they can serve a wide range of industries. Branded under the GlobalTech SmartWipes trade name, the alcohol wipes are ...Read More
JTAG Technologies: New Test Solutions

Eindhoven, The Netherlands — JTAG Technologies has introduced MAC-Panel Scout Mass Interconnect System — a new JTAG/boundary-scan hardware interface product compatible with the MAC-Panel Scout mass interconnect system. The JT 2147/DAK is a signal conditioning module that allows seamless connections ...Read More
Juki Intros Hi-Speed Compact Mounter

Morrisville, NC — Juki's new JX-200 high-speed compact mounter is a compact entry-level placement machine that uses the same placement system as the existing JX-100LED. The new machine not only uses a standard laser alignment system, it also uses a high resolution camera for vision placement. With ...Read More
K&F Electronics Adds Combo Stripper/Etcher

Fraser, MI — K & F Electronics has added a brand new Chemcut 547 XLI strip etch strip line. The new machine is expected to make the company's etching process even faster by adding a strip line to the beginning of the etch process. This will also permit etching very thin core PCBs.Read More
Manncorp: New 2-Pot Wave Solder Machine

Willow Grove, PA — Manncorp's new 16.350 wave solder machine provides easy changeover from lead/tin to lead-free solder. Instead of the usual single pot, this unit can be configured with two pots on roll-out carts to provide lead-free-to-Pb switching with ease. Read More
Mirtec: Advanced AOI Systems

Oxford, CT — Mirtec's MV-7xi in-line AOI system is configured with its exclusive 10MegaPixel ISIS Vision System. This unusual optics system is comprised of a 10MegaPixel Top-Down camera and a Precision 13.4µ telecentric compound lens. The MV-7xi is also configured with four 10 MegaPixel side-view ...Read More
Multitest's Upgrades Santa Clara Facility

Santa Clara, CA — Multitest, a designer and manufacturer of final test handlers, contactors and load boards used by integrated device manufacturers (IDMs) and final test subcontractors worldwide, has refined its pulse plating process at its Santa Clara board fab. This is expected to result in further ...Read More
Nihon Superior: Solder Paste Selector Guide

Osaka, Japan — Nihon Superior Co. Ltd. has introduced the new Selector Guide for SN100C solder pastes. Located at http://www.nihonsuperior.co.jp/eng  
the guide includes a detailed list of features for SN100C Solder Pastes. It includes SN100C P500 D4 for excellent reflow with  ...Read More
Nordson YESTECH: High Speed AOI

Carlsbad, CA — Nordson YESTECH, a subsidiary of Nordson Corporation has introduced its new high speed FX SL advanced AOI inspection system for populated printed circuit boards.
 
The FX SL AOI offers accelerated throughput at over twice the inspection speed of previous generation systems without sacrificing proven defect coverage ... 
Read More
OK Int'l: Next Gen Desoldering

Garden Grove, CA — OK International's MFR-1300 Desoldering System — part of the company's next-generation of standalone desoldering equipment — builds on existing MFR technology by incorporating a new innovative design that allows the hand-piece to be used in two configurations. The user is ...Read More
PCBs Get Solid Support from Production Solutions

Poway, CA — Production Solutions Inc. reports high demand for its cost-effective, unusual design board support. The GO!, added to the ML and AS models, rounds out the RED-E-SET line of products, providing both value and benefits for most circuit board support needs.Read More
RASIRC Intros Steamer Turbo with Hot Gas Blending

San Diego, CA — RASIRC® has introduced the new Steamer Turbo for specialty applications in the semiconductor and photovoltaic industries. This is the company's first steamer with integrated gas blending control, which reportedly solves the common problem of condensation when blending steam with ...Read More
SEHO: New Software Feature Ensures Reliability

Kreuzwertheim, Germany — SEHO Systems GmbH is introducing a new software function for its selective soldering system — the PowerSelective. The new function ensures even higher process reliability by compensating for product or production-related warpage of the assemblies to be processed.\par ...Read More
 
 
search login