Save. Share. Connect.
Friday, January 20, 2017
VOLUME - NUMBER
NEPCON South China '16
SEMICON West '16
Atlantic Design/ATX/MDM '16
NEPCON China,SMT/Hybrid Pkg,EDS,EWPTE '16
ATX/MDM West '16
productronica,The ASSEMBLY Show, IMAPS, MDM/Minneapolis '15
Nepcon South China '15
SEMICON West '15
ATX/MDM EAST '15
EDS, SMT/Hybrid Pkg,Wire Tech Expo '15
NEPCON China '15
ATX WEST/APEX '15
AATE and IPC MW 11
SMTAI, Autotest, ATX MW/MDM and Assembly '14
SEMICON West '13
Electronics West/MDM and IPC/APEX '13
SEMICON West '14
NEPCON China, SMT/Hybrid Pkg, EDS, NWPTE '14
IPC APEX '14
Electronics West/MDM 10
ATX Midwest, IMAPS, PCB West '13
ATX West '14
ATExpo & IPC MW 07
NEPCON China '13, EDS, more
SEMICON WEST/Intersolar '12
NEPCON China Product Preview '12
Atlantic Design/MDM 10
Electronics West/MDM 11
SEMICON WEST 10
Atlantic Design/MDM 11
ATLANTIC DESIGN & MFG '13
Atlantic Design/MDM 09
SEMICON WEST 08
NEPCON South China '13
ATExpo & IPC MW 08
Electronics West/MDM 08
NEPCON China Product Preview '13
Electronic West/MDM 09
SMTAI and productronica '13
Multi tradeshow Product Preview '12
AATE/IPC Midwest 10
Electronics West/MDM 12
ATE and IPC MW 09
SMTAI and productronica '13
Atlantic Design/MDM 08
Add Message Board
Modular Robotic Gripper from Schunk
Modular robotic gripper.
Morrisville, NC — Schunk has added a new modular long-stroke electric gripper — the LEG 400 — which can be used in the metal cutting and automotive industry, along with assembly and handling tasks. This weight-reduced, lightweight gripper is equipped with a servo motor and has a gripping force of up to 1050 N as well as a variable stroke between zero and 103mm. Having only one motor, it weighs 6.5 kg.
Designed as part of a modular system, the LEG gripper can be equipped with a pneumatic and electric drive. The user is able to choose whatever servo motor is desired. Robot manufacturers can thus use their own motors and control the gripper with the same set of commands as the robot. In addition, the applicable forces can be measured and controlled with servo-electric drives.
If the LEG is operated with a single servo motor, both drive spindles are coupled and the fingers move synchronously. With two motors on the other hand, the fingers can move to any position in the gripping range independently of each other.
The modularity of the LEG goes even further; both slides and guided slides as well as the supporting lateral cheeks and the connecting elements are available in different sizes and versions. The LEG gripper can thus be adapted economically to the corresponding task and load. Optional sensors or image processing systems make it a sensitive tool in the production, assembly, and packaging processes. A change system that can be used to change the fingers manually or automatically provides the user with additional flexibility.
Because of the low weight of the LEG gripper, excellent acceleration and high speeds are possible, and thus shorter cycle times. Alternatively, smaller actuators or robots can be used with identical cycle times, which saves energy, protects the environment and reduces running costs.
Contact: Schunk, Inc., 211 Kitty Hawk Dr., Morrisville, NC 27560
919-572-2705 fax: 919-572-2818 E-mail: email@example.com Web:
See at productronica Booth #A3.339.
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | firstname.lastname@example.org
powered by GIM