Save. Share. Connect.
Tuesday, May 31, 2016
VOLUME -26 NUMBER 9
Publication Date: 09/1/2011
Front Page News
People in the News
Electronic Mfg. Services
Electronic Mfg. Products
Special Features: Assembly and Production
Product Preview: AATE and IPC-MW
September 2011 Issue
Add Message Board
Sealed TO-8 VCO from Crystek
Hermetically sealed VCO in TO-8 case.
Fort Myers, FL — Crystek's CVCOT8BE-0800-1600 TO-8 VCO (Voltage Controlled Oscillator) operates from 800MHz to 1600MHz and provides high-performance frequency control in harsh, demanding environments. These VCOs have a typical phase noise of -92dBc/Hz at 10kHz offset and excellent linearity. Tuning sensitivity is rated at 79MHz/V. Pulling and Pushing are minimized to 20.0MHz and 4.0MHz/V, respectively; second harmonic suppression is -10dBc typical.
This is a full-functioning VCO in a rugged, hermetically sealed TO-8 package to protect the VCO from moisture, contaminants and other environmental hazards. The metal-can construction has gold-plated pins with no internal wire bonds, which provide enhanced signal integrity.
Engineered and made in the USA, the VCO has a control voltage range of 0V to 20V with an input voltage of 15V. Maximum current consumption is 20mA and output power is +10dBm. The TO-8 VCO line has an operating temperature range of -40 to +85°C
Contact: Crystek Corporation, 12730 Commonwealth Drive, Ft. Myers, FL 33913
800-237-3061 or 239-561-3311 fax: 239-561-1025 E-mail: email@example.com Web: www.crystek.com
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | firstname.lastname@example.org
powered by GIM