Saturday, December 10, 2016
VOLUME -26 NUMBER 8
Publication Date: 08/1/2011
Advertisements
Archive >  August 2011 Issue >  New Products > 

Ironwood Intros QFN Test Socket
QFN test socket.
Burnsville, MN — Ironwood Electronics has introduced a new stamped spring pin socket that addresses high performance requirements for testing Amkor's 24 lead QFN, the CBT-QFN-7005. The contactor is a stamped spring pin with 26 gram actuation force per ball and cycle life of 500,000 insertions.
 
The self inductance of the contactor is 0.88nH, insertion loss <1dB at 15.7GHz and capacitance 0.097pF. The current capacity of each contactor is 4 amps at 80°C temperature rise. Socket temperature range is -55 to +180°C. The socket uses a low-profile snap lid for ease of operation. It also has a wave spring with swivel compression plate for vertical force without distorting device position.
 

The specific configuration of the package to be tested in the socket is a QFN, 4 x 4mm, 0.5mm pitch, 24 positions with center ground pad. The socket is mounted using supplied hardware on the target PCB with no soldering, and uses the smallest footprint in the industry. The small footprint allows inductors, resistors and decoupling capacitors to be placed very close to the device for impedance tuning.

To use, place QFN device into the socket and close the lid by snapping to the latch. This socket can be used for quick device screening and device characterization at extreme temperatures.

Contact: Ironwood Electronics, Inc., 11351 Rupp Dr., Suite 400, Burnsville, MN 55337 800-404-0204 or 952-229-8200 fax: 651-452-8400 E-mail: info@ironwoodelectronics.com Web:
http://www.ironwoodelectronics.com

 
 
search login