Save. Share. Connect.
Tuesday, May 31, 2016
VOLUME -26 NUMBER 8
Publication Date: 08/1/2011
Front Page News
People in the News
Electronic Mfg. Services
Electronic Mfg. Products
Special Features: Test and Measurement
Product Preview: Autotestcon
August 2011 Issue
Add Message Board
Hi-Temp Lo-ESD Tape from Desco
Chino, CA — Desco's Wescorp brand ESD Hi Temp Polyimide Tape is a low-charging tape that can be exposed to high temperature applications such as wave soldering. The polyimide film is 2.4 mils (91µ) thick, and will not leave a residue when removed. The tape generates less than 50V (at 73°F, 45 percent RH average) when unwound from the roll, making it safe to use around most ESD-sensitive components.
Adhesive surface resistance is 10E4 to 10E8 ohms. It is temperature-resistant to 572°F (300°C) for 10 seconds max. The tape is lead-free and RoHS-compliant. Four widths are available: 1/4, 1/2, 3/4, and 1-in. (6.35, 12.7, 19, and 25.4mm). All are on 3-in. (76mm) cores.
Contact: Desco, 3651 Walnut Ave., Chino, CA 91710
909-627-8178 fax: 909-627-7449 E-mail: email@example.com Web:
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | firstname.lastname@example.org
powered by GIM