Save. Share. Connect.
Friday, September 30, 2016
VOLUME - NUMBER
Electronic Mfg. Products
Add Message Board
Manncorp Split-Vision Rework Station
Lead-free split-vision rework station.
Willow Grove, PA — BGAs, QFPs and other fine-pitch devices can now be desoldered, removed and replaced by using the BR720 lead-free rework station from Manncorp. Utilizing split-vision zoom optics with 22x magnification, real-time images of components superimposed on solder pads are continuously displayed on the system monitor. Perfect alignment is achieved when the operator makes final X and Y micrometer adjustments enabled by LED lighting that provides high image contrast.
The processing stage includes controlled heat from three sources: hot air top and bottom — capable of lead-free temperatures of up to 350°C. In addition, an IR underheater prevents board warpage by evenly heating the entire PCB. Accurate profile monitoring is assured by the use of the onboard independent K-type thermocouple port. The placement head with automatic Z axis removes, places and solders components without operator intervention,
The system includes a built-in vacuum generator, eliminating the need for an external air source while providing plug-and-play capability at any location throughout the production floor. It will accommodate large boards to 550 x 500mm (21.6 x 19.7-in.).
Contact: Manncorp, 2845 Terwood Rd., Willow Grove, PA 19090
800-745-6266 or 215-830-1200 fax: 215-830-1206 E-mail: firstname.lastname@example.org Web:
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | email@example.com
powered by GIM