Save. Share. Connect.
Tuesday, February 21, 2017
VOLUME - NUMBER
ATX West and IPC APEX '17
SMTAI and IMAPS '16
SEMICON West '16
NEPCON China '15
ATX WEST/APEX '15
AATE and IPC MW 11
SMTAI, Autotest, ATX MW/MDM and Assembly '14
Electronics West/MDM and IPC/APEX '13
SEMICON West '14
IPC APEX '14
NEPCON China Product Preview '12
Electronics West/MDM 11
SEMICON WEST 10
Atlantic Design/MDM 11
ATLANTIC DESIGN & MFG '13
SEMICON WEST 08
Electronics West/MDM 08
NEPCON China Product Preview '13
Multi tradeshow Product Preview '12
Electronics West/MDM 12
ATE and IPC MW 09
NEPCON South China '16
Atlantic Design/ATX/MDM '16
NEPCON China,SMT/Hybrid Pkg,EDS,EWPTE '16
ATX/MDM West '16
productronica,The ASSEMBLY Show, IMAPS, MDM/Minneapolis '15
Nepcon South China '15
SEMICON West '15
ATX/MDM EAST '15
EDS, SMT/Hybrid Pkg,Wire Tech Expo '15
SEMICON West '13
NEPCON China, SMT/Hybrid Pkg, EDS, NWPTE '14
Electronics West/MDM 10
ATX Midwest, IMAPS, PCB West '13
ATX West '14
ATExpo & IPC MW 07
NEPCON China '13, EDS, more
SEMICON WEST/Intersolar '12
Atlantic Design/MDM 10
Atlantic Design/MDM 09
NEPCON South China '13
ATExpo & IPC MW 08
Electronic West/MDM 09
SMTAI and productronica '13
AATE/IPC Midwest 10
SMTAI and productronica '13
Atlantic Design/MDM 08
Add Message Board
A-Tek Intros Next-Gen Ebso Selective Solder
New Ebso SPA-NC selective soldering system.
Berthoud, CO — A-Tek Systems Group, an electronics equipment distribution company is introducing the Ebso SPA-NC — its next generation selective solder platform. The product is highly flexible, with automatic selective soldering cells with manual load/unload.
Because a number of PCBs have thermally sensitive components and complex SMD layouts, which are challenging and likely unsuitable for processing in a traditional wave solder machine. To overcome the soldering challenges, some electronics manufacturers will use custom solder masks to cover the SMD components. But, this is an added assembly step that adds costly additional handling.
The new selective solder platform overcomes these challenges by automatically transporting the PCB to each critical soldering step via an XYZ-axis carrier, using a Microdrop fluxer, bottom-side preheater and soldering modules. The final result: perfect solder joints and a reliable, repeatable process.
To reduce surface tension of the solder wave, and to achieve the highest quality soldering results, nitrogen is provided to the solder bath and solder pump unit. The special "Fast Remove Pump System
" designed by Ebso, enables maintenance personnel to access the pump within minutes. Using the special tool, the pump head is simply turned 45° and easily lifted out of the bath while still secured in the maintenance fixture. Furthermore, the solder bath and pump in the SPA-NC are made of Titanium, making the machine suitable for both lead and lead-free production environments.
All SPA-NC Selective Soldering machines include the EBSO Photo Editor, a Windows
-based software program. Utilizing a "Point and Click" feature, soldering programs are easily created within minutes. Programming the SPA-NC is intuitive and easy. A scanned image of a bare PCB is all that is needed. Once the PCB is scanned, it is loaded into the editor, and appropriately scaled. For each flux and each solder point, the operator uses the mouse to point and click on the image to teach the soldering locations. The software automatically calculates the correct X and Y value. Because the operator is looking at the PCB image when creating the program, the operator can see all neighboring components to optimize the program and select the appropriate nozzle. This negates the requirement for expensive teach cameras.
The SPA-NC utilizes an integrated Schleicher controller. The controller is a black/white touch screen with I/O capabilities. The primary function is machine calibration (homing positions), turning on/off the N2 supply, turning the solder pot on/off. The controller acts as the interface for the solder program when imported from the offline editor.
The selective solder platform provides: soldering under 7° or 0°; dual nozzle and dual flux for increased throughput; widest range of soldering nozzles available including both wettable and jet nozzles up to 60mm in width; micro-drop and spray fluxing.
Contact: A-Tek Systems Group LLC, 5213 Longs Peak Road, Suite G, Berthoud, CO 80513
970-532-5100 fax: 970-532-5101 Web:
See at APEX Booth #2411.
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | firstname.lastname@example.org
powered by GIM