Save. Share. Connect.
Tuesday, August 30, 2016
VOLUME - NUMBER
HOME / CURRENT ISSUE
Electronic Mfg. Products
Add Message Board
Fancort Intros Japan UNIX Laser Soldering
Laser soldering system.
West Caldwell, NJ — Fancort Industries is now a North American distributor of the Japan UNIX robotic laser soldering systems. Laser soldering has some distinct advantages over contact soldering when it is difficult to get a soldering iron to the point of contact, or throughput needs to be higher, or more intense heat is required.
The system uses a high-output laser diode as a heat source to perform non-contact spot soldering through optical fibers. According to the company, the laser is the best technique to use for small spot heating. The Fancort/UNIX laser system has power options of 30 or 50 watts, spot size down to 0.2mm, and custom lenses to create various shapes such as a triangle, doughnut, etc. Another special feature of laser soldering is minimal thermal effect on and around the spots that are being soldered.
An unusual patented feature is the coaxial CCD camera which is built into the laser head to make programming very easy. The irradiated laser shoots an image of the target point which is seen on the camera display as the operator programs the robot. The laser control can store up to 32 output conditions, and 63 soldering conditions overall in the complete program. Solder wire feed amount and rate are programmed with the teach pendant, as are all the robot work points.
The laser system is integrated into a Janome desktop robot, but can also be integrated with a SCARA robot for in-line automation. The desktop robot has a working area of 300 x 320 x 100mm (11.8 x 12.6 x 3.9-in.) and repeatable accuracy of ±0.01mm.
Contact Fancort Industries, Inc., 31 Fairfield Place, West Caldwell, NJ 07006
888-326-2678 or 973-575-0610 fax: 973-575-9234 Web:
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | firstname.lastname@example.org
powered by GIM