Save. Share. Connect.
Monday, October 24, 2016
VOLUME - NUMBER
Switches & Relays
Add Message Board
TDK-EPC Intros Multi Measuring Interface
Power factor calibration instrument.
Iselin, NJ — TDK-EPC has introduced a new EPCOS brand Multi Measuring Interface, the EPCOS MMI7000. The new product is a universal measuring device to measure and control the most important grid parameters in a PFC (power factor correction) system. Harmful conditions in the power grid — such as high harmonic content — that negatively impact the system can be immediately detected.
The instrument is designed for three-phase measuring, display and recording of values. In addition, it can be used in combination with a PF-controller series for external measurements. With dimensions of 144 x 144mm, the unit was designed in the same way as the company's PF controllers and is suited for switchboard mounting. Like all controllers and measuring devices, it provides an easy-to-use graphical menu and an integrated help function. Menu languages are English, German, Russian, Spanish and Turkish. The LCD full graphic display shows bar graphs, diagrams and different font sizes. Application areas include grid measuring, power measurement, harmonic measurement and energy meter. It can also be used as an additional external measuring system accessory for the EPCOS BR6000 controller — as in 3-phase measuring — and as a transmitter for external systems.
The MMI7000 can measure and display: voltage 3-phase; current 3-phase; frequency 3-phase; active power 3-phase; reactive power 3-phase; apparent power 3-phase; power factor 3-phase; harmonic of voltage up to 51st; harmonic of current up to 51st; thd-v 3-phase; THD-I 3-phase.
Three versions of the MMI7000 are available. All display and record minimum and maximum values, date and time, harmonics as a bar chart, and include an oscilloscope mode for graphic display of complete oscillation as well as a free programmable display of measured values and rotating display of selected display values. The MMI7000-S also includes two independent RS-485 interfaces. And the MMI7000-E further offers an additional interface memory card and inputs and outputs. In addition, the MMI7000-E provides a potential-free signal input, four programmable relay outputs, one programmable transistor output, one interface RS485, a pluggable SD-card for recording all grid parameters, recording time per data file at measuring interval, and PC software for visualization, administration and evaluation of recorded data.
Contact: TDK-EPC, 485B Route 1 South, Suite 200, Iselin, NJ 08830
800-888-7729 or 732-906-4395 fax: 732-632-2830 Web:
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | email@example.com
powered by GIM