Save. Share. Connect.
Tuesday, February 21, 2017
VOLUME -25 NUMBER 12
Publication Date: 12/1/2010
Front Page News
People in the News
Electronic Mfg. Services
Electronic Mfg. Products
Special Features: Test and Measure
Product Preview: electronica
December 2010 Issue
Add Message Board
Kistler Intros NC Force Measurement System
NC force-displacement measurement system.
Amherst, NY — Kistler Instrument Corporation has introduced the DMF-P A310 Universal Type 4740A series — a high-precision force-displacement measurement system. The new product is designed for monitoring electromechanical NC joining modules and their associated joining and pressing-in operations within assembly automation and other industrial process monitoring applications.
The new unit is designed to be directly compatible with the company's electromechanical NC joining module types NCFH, NCFN, NCFT, NCFS and NCFB. The new DMF-P A310 Universal Type 4740A series builds upon the success of the company's DMF-P A300 NCF Type 4734A, which has been field-proven as uniquely effective within complex industrial joining and process monitoring applications.
The new module monitors joining and press-fit processes and associated characteristics with the aid of 32 programs, each independently offering up to eight adjustable tolerance windows, making it possible to keep track of parameters such as fitting forces, end points or overloads with four-quadrant measurement capabilities. The system also allows an operator to define critical parts of joining processes and to select from more than 30 different window types, such as end, joining or inflexion point, while monitoring parameters such as threading force, end position, overload, variable windows, process speed and measurement curve slope. Onboard storage capabilities are up to 100 curve memories and 1,000 measured value memories. In addition, up to 16 position sets per program can be assigned, consisting of position, speed and set relay in step or automatic mode to suit individual requirements. The system also has evaluation windows for break-point functions, used to detect and stop motion during events, such as those caused by a retaining ring snapping into place, for example. It provides the station control system with evaluation results in the form of an "OK" or "NOK" signal, for example, along with measurements and set points.
The system includes an integral Ethernet/IP master, providing the servo controller and associated NC joining module with integrated sequence control, including jog, step and automatic modes, while allowing the IndraDrive servo controller to be operated and controlled directly by the DMF-P A310 Universal, without requirement of the PLC master control system to be fully functional. This allows for quick and easy setup of all common machinery control systems without any special function block. The system's integral, fully configurable fieldbus interface enables reading and writing of almost every parameter into the DMF-P A310 Universal, offering a simple system control connection with added flexibility.
Contact: Kistler Instrument Corp., 75 John Glenn Drive, Amherst, NY 14228
888-547-8537 or 716-691-5100 fax: 716-691-5226 E-mail: email@example.com Web:
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | firstname.lastname@example.org
powered by GIM