Save. Share. Connect.
Thursday, July 28, 2016
VOLUME - NUMBER
SEMICON West '16
Atlantic Design/ATX/MDM '16
NEPCON China,SMT/Hybrid Pkg,EDS,EWPTE '16
ATX/MDM West '16
productronica,The ASSEMBLY Show, IMAPS, MDM/Minneapolis '15
Nepcon South China '15
SEMICON West '15
ATX/MDM EAST '15
EDS, SMT/Hybrid Pkg,Wire Tech Expo '15
NEPCON China '15
ATX WEST/APEX '15
AATE and IPC MW 11
SMTAI, Autotest, ATX MW/MDM and Assembly '14
SEMICON West '13
Electronics West/MDM and IPC/APEX '13
SEMICON West '14
NEPCON China, SMT/Hybrid Pkg, EDS, NWPTE '14
IPC APEX '14
Electronics West/MDM 10
ATX Midwest, IMAPS, PCB West '13
ATX West '14
ATExpo & IPC MW 07
NEPCON China '13, EDS, more
SEMICON WEST/Intersolar '12
NEPCON China Product Preview '12
Atlantic Design/MDM 10
Electronics West/MDM 11
SEMICON WEST 10
Atlantic Design/MDM 11
ATLANTIC DESIGN & MFG '13
Atlantic Design/MDM 09
SEMICON WEST 08
NEPCON South China '13
ATExpo & IPC MW 08
Electronics West/MDM 08
NEPCON China Product Preview '13
Electronic West/MDM 09
SMTAI and productronica '13
Multi tradeshow Product Preview '12
AATE/IPC Midwest 10
Electronics West/MDM 12
ATE and IPC MW 09
SMTAI and productronica '13
Atlantic Design/MDM 08
HOME / CURRENT ISSUE
Add Message Board
Radiall Intros Kit for Wireless Stations
Optical fiber connection kit.
Chandler, AZ — Radiall USA, Inc. is introducing its new R2CT connection kit, which provides a waterproof, sealed connection for fiber-to-the-antenna (FTTA), remote radio head equipment, and similar outdoor applications where a protected interface is needed. The field-installable kit provides low-cost sealing at the transceiver-to-cable interface and ensures robust mechanical and environmental performance.
The kit is designed for optical systems using SFP transceivers and duplex LC-terminated fiber-optic cable. The kit can be reused, allowing cables and transceivers to be changed in the field, including front-panel swapping of transceivers. The kits can also be assembled over existing cables.
Sealing levels are IP65, with IP67 optionally available, with a durability of 100 mating cycles minimum and a temperature range from -40 to +85°C. The mated connection has a retention force of 200 N (45 lb).
The kit uses a receptacle attached to the equipment panel and a plug assembly over the cable. The plug and receptacle use a double bayonet locking system to allow a toolless, hand-tightened connection. The plug assembly includes a protection cap that can be used for pulling cable.
The R2CT connection kit can easily be used with other connectors and interfaces, such as RJ-45 or USB connections.
Contact: Radiall USA, Inc., 6825 West Galveston Street, Chandler, AZ 85226
480-682-9400 fax: 480-682-9403 E-mail: firstname.lastname@example.org Web:
See at electronica Booth #B3.474.
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | email@example.com
powered by GIM