Save. Share. Connect.
Monday, March 27, 2017
VOLUME - NUMBER
Switches & Relays
Add Message Board
Regal Intros Edge-Mounted BNCs
BNCs with firm PCB mounting.
Sunnyvale, CA — Regal Electronics has introduced a "Space-Saver" BNC connector that mounts on the edge of a printed circuit board. In addition to a low profile advantage in applications with tight vertical constraints, the new connector also reduces the twisting stress on solder joints inherent in BNC connector mating. A "notch" in the new connector slips over the edge of a PC board prior to soldering, forming a tight mechanical fit that transfers the majority of the rotational energy to the PC board instead of more vulnerable solder joints.
Another advantage of the BNC's edge-mounted design is that the center pin and connector body are soldered directly to a PC board, minimizing the "antenna effect" caused by typical elevated mounting approaches and associated EMI/RFI problems at higher frequencies. The new BNC connector has a 75Ω impedance and is tested to 2Ghz.
Contact: Regal Electronics, Inc., 120 San Lucar Court, Sunnyvale, CA 94086
408-988-2288 fax: 408-988-2797 Web:
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | email@example.com
powered by GIM