Save. Share. Connect.
Sunday, January 21, 2018
VOLUME -25 NUMBER 10
Publication Date: 10/1/2010
Front Page News
People in the News
Electronic Mfg. Services
Electronic Mfg. Products
Special Features: Components and Distribution
Product Preview: electronica
October 2010 Issue
Add Message Board
Sticky Thermal Interface from Fujipoly
Sticky thermal interface material.
Carteret, NJ — Fujipoly has introduced Sarcon
GR-Tac, a highly conformable and durable 0.25mm thick polyester-reinforced thermal interface material (TIM). Sarcon 25GR-Tac is easy to install and typically does not require adhesive due to its naturally tacky consistency. These inherent characteristics make it especially suitable for applications where surface space and surface textures vary.
According to the company, GR-Tac is a very economical thermal interface solution and is suitable for both low and high-volume production runs. When placed between a heat source such as a high-performance semiconductor and a nearby heat sink, this TIM will transfer heat with a thermal conductivity of 1.5 W/m°K and a thermal resistance as low as 0.33°C/in
/W. Due to its reinforced polyester mesh construction, this gap filler pad is an excellent choice for most die-cut installations. It is available in sheets up to 300 x 200mm.
Contact: Fujipoly America Corporation, P.O. Box 119, Carteret, NJ 07008
732-969-0100 fax: 732-969-3311 E-mail: email@example.com Web:
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | firstname.lastname@example.org
powered by GIM