Save. Share. Connect.
Saturday, September 23, 2017
VOLUME -25 NUMBER 9
Publication Date: 09/1/2010
Front Page News
People in the News
Electronic Mfg. Services
Electronic Mfg. Products
Special Features: PCB and Assembly
Product Preview: AATE/IPC Midwest
September 2010 Issue
Add Message Board
Phoenix Contact Intros Field-Wired Connectors
Field wired connector.
Middletown, PA — Phoenix Contact's 12- and 17-position M12 connectors for field devices are designed to meet the needs of increasingly smaller machines and devices. The company's introduction of field-wired M12 connectors in 12 and 17 positions can be used in applications where previously only M23 and larger connectors could be used.
The sensor/actuator connectors use Piercecon
connection technology for easy field installation. With Piercecon, technicians can make signal connections in three steps — strip the cable jacket, insert the wires and screw the housing tight. No soldering or wire preparation is necessary.
The connectors are designed for I/O connections in applications such as image processing systems, decoders, encoders, pressure sensors, measurement devices and master cables for sensor boxes.
The M12 connectors have color-coded terminals and are available in both male and female versions. They meet IP65/67 requirements and fit wire range #28-26 AWG.
Contact: Phoenix Contact, Inc., P.O. Box 4100, Harrisburg, PA 17111- 0100
800-322-3225 or 717-944-1300 fax: 717-944-1625 E-mail: firstname.lastname@example.org Web:
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | email@example.com
powered by GIM