Save. Share. Connect.
Wednesday, August 31, 2016
VOLUME - NUMBER
HOME / CURRENT ISSUE
Electronic Mfg. Products
Add Message Board
Protective Masking Film from Pres-On
Addison, IL — Pres-On is offering its new PBCMF-1.5, an optically clear masking film that adheres to fragile plastics, glass and polished metals that require temporary surface protection through assembly and/or shipping. The film's light-tack, static-cling properties allow it to be easily removed, leaving behind no adhesive residue and assuring every product is free from defects and ready for use.
The product consists of a removable acrylic PSA coated on a 1.5 mil polyester film. The adhesive does not build over time, and will ultimately remove cleanly from most surfaces up to six months after being applied, or up to one year depending on the environment. It has a very low initial grab which allows for repositioning over the surface, plus it exhibits excellent resistance to plasticizers used in PVC and elastomers.
The extremely versatile material is also excellent as a support film for thin film substrates, or as a carrier film support for die cutting.
PBCMF-1.5 is available on standard rolls of 1, 6 and 12-in. widths and lengths of 216-ft. Custom sizes can also be ordered.
Contact: Pres-On Products, 39 Factory Road, Addison, IL 60101
800-323-7467 or 630-543-9370 fax: 630-543-9406 E-mail: email@example.com Web:
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | firstname.lastname@example.org
powered by GIM