Save. Share. Connect.
Monday, May 30, 2016
VOLUME - NUMBER
HOME / CURRENT ISSUE
Electronic Mfg. Products
Add Message Board
Renishaw Intros 5-Axis Touch-Trigger Probe
Touch-trigger probe head.
Hoffman Estates, IL — Renishaw's new PH20 probe head increases touch-trigger coordinate measurement machine (CMM) inspection throughput up to three times using fast, infinite, rotary positioning and unique "head touch" capability for high-speed point capture with minimal CMM movement. Designed for use with the industry-standard TP20 touch-trigger probe, the new PH20 head brings 5-axis inspection capability to smaller CMMs for the first time by optimizing the working volume of the measurement platform.
The PH20 is available for new CMMs, as well as retrofit machines using shank or quill mounting. It can use most existing inspection programs for indexing heads without modification, and requires no compressed air.
Unlike conventional touch-trigger measurement which relies on speeding up the movement of the CMM's 3 axes to measure quickly, PH20 uses head motion to minimize CMM movement — and the associated dynamic errors — at higher measurement speeds. It also enhances inspection efficiency with adaptive positioning to accommodate part misalignment and provide optimal feature access." The probe head offers additional time savings with synchronized motion of the head and CMM between measurements. Its unusual rapid "inferred calibration" technique determines head orientation and probe position in a single operation, allowing subsequent measurements at any head angle.
The unit incorporates the TP20 touch-trigger probe, affording access to a range of proven probe modules and wide selection of trigger forces, directional sensing options and extensions to meet application requirements. Current users of TP20 systems can upgrade to the PH20 and utilize all existing modules, with the exception of the extended-force module.
Contact: Renishaw, Inc., 5277 Trillium Boulevard, Hoffman Estates, IL 60192
847-286-9953 fax: 847-286-9974 E-mail: Susan.firstname.lastname@example.org Web:
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | email@example.com
powered by GIM