Save. Share. Connect.
Sunday, January 22, 2017
VOLUME - NUMBER
Switches & Relays
Add Message Board
Protek Intros Wall Mount Medical Power Supplies
Medical grade power supply.
Hudson, MA — The new PMP15M Series of AC/DC power adapters from Protek Power are a flexible, provide a low-cost option for patient vicinity medical device applications.
The adapters accept a 90 to 264VAC input and are available with four interchangeable input plugs (US, UK, EU, Australian) which attach to the compact 3.08 x 2.04 x 1.35-in. (78 x 52 x 34mm) body of the adapter. Single outputs range from 5VDC through 24VDC, or modified voltage requests can be accommodated.
The power units have certification to worldwide EN60601-1 safety standards, RoHS compliance, CE Mark, and are complaint to radiated and conducted EN55011 Class B emission limits. With a very low standby power of 0.3W typical, the PMP15M complies with CEC Level IV regulations. MTBF is 300,000 hours at full load and 25°C ambient temperature.
The power supplies can provide efficiencies to 76 percent, leakage current of 100µA maximum at 264VAC, and 4000VDC input-ground withstand voltage. Comprehensive protection circuitry, including overvoltage, overcurrent, and short circuit protection, is inherent in the design.
Contact: Protek Test & Measurement, 45 Smith St., Englewood, NJ 07631
201-227-1161 fax: 201-227-1169 E-mail: firstname.lastname@example.org Web:
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | email@example.com
powered by GIM