Save. Share. Connect.
Friday, February 24, 2017
VOLUME - NUMBER
Switches & Relays
Add Message Board
LeCroy Intros Trigger and Decode Package
Oscilloscope triggering with color-coded overlays.
Chestnut Ridge, NY — LeCroy Corporation's new 1553 TD (trigger and decode) package provides all the tools needed to analyze and debug the MIL-STD-1553 protocol bus. Immediately available for the WaveSurfer Xs/Xs-A, WaveRunner Xi/Xi-A, WavePro 7 Zi and WaveMaster 8 Zi oscilloscopes, the new 1553 TD decode provides both a transfer level view to enable a higher level understanding of messaging and timing, or a word level view to debug at the individual bit level.
Traditional MIL-STD-1553 debug tools only show the messages in a text file without providing a view of the waveform to truly understand the signal behavior. The 1553 TD solution provides both the protocol analyzer view in the table view, and the oscilloscope view to debug on the physical layer signal.
Color-coded overlays on various sections of the protocol decode are used by 1553 TD for a visual display that is easy to understand. This exclusive feature is intuitive for experienced engineers, and is especially useful for users new to the MIL-STD-1553 standard. In addition, decode information condenses or expands depending on the timebase/zoom ratio setting, simplifying both routine verification and complex troubleshooting. Engineers can choose to decode into Hex and Binary.
The trigger can be configured for both transfer level and word level messaging. In addition, it provides tools to isolate specific errors in the protocol to quickly pinpoint the area causing the most problems. A timing trigger mode allows the user to quickly find timing violations of both the intermessage gap time (IMG) or the response time between a BC and RT, or from a RT to another RT. The 1553 TD trigger solutions help to isolate rare problems not easily detected by viewing decoded data alone or by viewing the data with a bus analyzer. In addition, 1553 TD turns the oscilloscope into a protocol analyzer with a customizable table display or protocol information which can be exported as an Excel file.
Contact: LeCroy Corp., 700 Chestnut Ridge Road, Chestnut Ridge, NY 10977-6499
800-553-2769 or 845-425-2000 fax: 845-578-5985 E-mail: firstname.lastname@example.org Web:
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | email@example.com
powered by GIM