Save. Share. Connect.
Sunday, September 25, 2016
VOLUME -25 NUMBER 5
Publication Date: 05/1/2010
Front Page News
People in the News
Electronic Mfg. Services
Electronic Mfg. Products
Special Features: Components and Distribution
Product Preview: EDS
May 2010 Issue
Add Message Board
WAGO: mV Signal Conditioner
Germantown, WI — A new mV signal conditioner has joined WAGO Corp.'s JUMPFLEX line of Signal Conditioners and Relays. Engineered for industrial sensors, the 857-819 mV Signal Conditioner accepts bipolar mV inputs from -100mV to +1000mV, and converts to a current or voltage output. Current output available is in 4-20 mA, 0-20mA, 0-10mA and 2-10mA variants; voltage output available in 0-10V, 2-10V, 0-5V and 1-5V variants.
According to the company, the unit ensures safety through 3-way isolation (test voltage of 2.5kV). Beyond configuration by DIP switch, the 857-819 configures non-linear curves via WAGOFrame FDT/DTM-based software. The software also provides parameterization, start-up and field device diagnostics. The highly efficient signal conditioner has transmission errors of less than 0.1 percent on adjusted span.
CAGE CLAMP's Spring Pressure Connection Technology provides vibration-proof and maintenance-free terminations. In addition, CAGE CLAMP's ensures mV Signal Conditioner terminations are temperature cycling-resistant for reliable performance in temperatures ranging from -25 to +70°C.
The UL listed product shares the industry's most compact 6mm-wide housing and common profile with the entire JUMPFLEX line. JUMPFLEX's pluggable relays, as well as configurable and dedicated models support all signal types, and employ a flexible push-in jumpering system to eliminate redundant wiring.
Contact: WAGO Corp., P.O. Box 1015, Germantown, WI 53022
800-346-7245 or 262-255-6333 fax: 262-255-3232 E-mail: email@example.com Web:
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | firstname.lastname@example.org
powered by GIM