Save. Share. Connect.
Tuesday, October 25, 2016
VOLUME - NUMBER
NEPCON South China '16
SEMICON West '16
Atlantic Design/ATX/MDM '16
NEPCON China,SMT/Hybrid Pkg,EDS,EWPTE '16
ATX/MDM West '16
productronica,The ASSEMBLY Show, IMAPS, MDM/Minneapolis '15
Nepcon South China '15
SEMICON West '15
ATX/MDM EAST '15
EDS, SMT/Hybrid Pkg,Wire Tech Expo '15
NEPCON China '15
ATX WEST/APEX '15
AATE and IPC MW 11
SMTAI, Autotest, ATX MW/MDM and Assembly '14
SEMICON West '13
Electronics West/MDM and IPC/APEX '13
SEMICON West '14
NEPCON China, SMT/Hybrid Pkg, EDS, NWPTE '14
IPC APEX '14
Electronics West/MDM 10
ATX Midwest, IMAPS, PCB West '13
ATX West '14
ATExpo & IPC MW 07
NEPCON China '13, EDS, more
SEMICON WEST/Intersolar '12
NEPCON China Product Preview '12
Atlantic Design/MDM 10
Electronics West/MDM 11
SEMICON WEST 10
Atlantic Design/MDM 11
ATLANTIC DESIGN & MFG '13
Atlantic Design/MDM 09
SEMICON WEST 08
NEPCON South China '13
ATExpo & IPC MW 08
Electronics West/MDM 08
NEPCON China Product Preview '13
Electronic West/MDM 09
SMTAI and productronica '13
Multi tradeshow Product Preview '12
AATE/IPC Midwest 10
Electronics West/MDM 12
ATE and IPC MW 09
SMTAI and productronica '13
Atlantic Design/MDM 08
Add Message Board
Robotas Systems Optimize Hand Assembly Operations
Manual assembly tech with electronic carousel and video prompting screen.
Meopham, Kent, UK — Robotas supplies hardware and software solutions that increase quality, reduce cost, and eliminate setup time. Many assembly systems are installed worldwide, in companies including Intel, Hewlett Packard, Agilent, Jabil, Nokia, and Westinghouse. The systems are seen by many users as "best practice" for those operations involving hand assembly. The company's SIGMA range addresses mechanical hand assembly, including cable assembly and box build, and is suitable for military, aerospace, and medical companies, where batch sizes may be low, configurations numerous, and quality must be on the mark. Systems can be stocked with parts for many assembly types, totally eliminating setup.
Robotas SIGMA systems for mechanical assembly automatically present the operator with exactly the right part, in the right sequence, with the right assembly instructions, to build the product right the first time, every time. Video or images can be shown, step by step. The company developed the product in response to customer requests for help with non-PCB assembly. SIGMA is easy to program, and speeds up documentation of the build. Operator comments can be captured and reviewed with a redline feature to fine-tune the assembly sequence, and the system also provides reports, kanban and scrap features, and can capture management information for analysis with the optional Workflow software.
Robotas' MASCOT products address PCB hand assembly, and are made in several configurations: standalone, in-line, and retrofitted onto existing conveyors.
All systems use a precise laser to indicate the right placement position on the circuit board, with automatic carousels to offer only the right part at the right time. The assembly sequence is pre-optimized, and the operator is shown an image of the finished board, overlaid with the right position, and a close-up view of the current part to aid correct placement.
The Robotas line is distributed in the U.S. by PFI of Florida.
Contact: Robotas Technologies Ltd, Broadlands House, Foxendown Lane, Meopham, Kent, DA13 0AE, UK
+44 1474 815 815 E-mail: email@example.com Web:
In the U.S.: PFI of Florida Inc., 3876 Bengert St., Orlando, FL 32808
407-402-7599 or 407-822-4499.
See at APEX Booth #311.
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | firstname.lastname@example.org
powered by GIM