Save. Share. Connect.
Friday, July 29, 2016
VOLUME -25 NUMBER 2
Publication Date: 02/1/2010
Front Page News
People in the News
Electronic Mfg. Services
Electronic Mfg. Products
Special Features: Components and Distribution
Product Preview: Electronics West / MDM
February 2010 Issue
Add Message Board
UEI Intros 2-Channel Synchro/Resolver Interface Boards
Walpole, MA — United Electronic Industries (UEI) has released its DNx-AI-255 Synchro/Resolver interface boards. The boards are available in two models — one for use with the company's popular PowerDNA Cubes and another for rack-mounting in a PowerDNR RACKtangle or HalfRACK chassis.
Multiple operating modes ensure compatibility with all standard sensor wiring and excitation configurations, making the boards suitable for a very wide range of rotational position or motion applications. Each board has two fully isolated, synchro/resolver channels with independent A/D converters, and each channel offers 16-bit resolution, ±2.6 arc-minutes accuracy, and scan rates up to 4000Hz.
A key feature of the new boards is the ability to operate either as a synchro/resolver input interface or as a simulation output device — on a per-channel basis. Each of the channels may be configured either as a synchro/resolver input with internal or external excitation or as a synchro/resolver simulated output. Each simulated output may be used as a software-controlled input stimulus for an avionics test system or flight simulator.
Each channel may be configured to output 50Hz to 4kHz excitation voltages to the primary of a synchro/resolver device or alternatively as the simulated output voltage from the secondary of a synchro/resolver. In simulator mode, the board uses a software-defined value as the position input for a simulated device.
Contact: United Electronic Industries, Inc., 27 Renmar Ave., Walpole, MA 02081
508-921-4557 E-mail: firstname.lastname@example.org Web:
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | email@example.com
powered by GIM