Save. Share. Connect.
Thursday, May 25, 2017
VOLUME -25 NUMBER 2
Publication Date: 02/1/2010
Front Page News
People in the News
Electronic Mfg. Services
Electronic Mfg. Products
Special Features: Components and Distribution
Product Preview: Electronics West / MDM
February 2010 Issue
Add Message Board
Multi-Seals Intros Dissolvable Spacers
Die-cut dissolvable spacers.
Manchester, CT — Multi-Seals, Inc. is introducing Wash-Away dissolvable spacers, designed to provide consistent spacing between printed circuit boards and mounted components. These organic polymer spacers locate PCB components during soldering operations. After soldering, Wash-Aways dissolve in water or alcohol baths. This leaves uniform spacing between components and boards, which provides free circulation of air, mechanical protection, optimum filleting, and greater accessibility for inspection, cleaning, and conformal coating.
Wash-Aways are available in a wide range of sizes and shapes to accommodate a variety of components, including resistors, capacitors, transistors, potentiometers, and integrated circuits. Wash-Aways contain no ionizable material, salts, sugars, metals, or soaps, and they are non-corrosive, non-conductive, and non-toxic.
Contact: Multi-Seals Inc., 540 North Main Street, Manchester, CT 06042
860-643-7188 fax: 860-643-5669 E-mail: email@example.com Web:
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | firstname.lastname@example.org
powered by GIM