Tuesday, May 24, 2016
Publication Date: 02/1/2010
ARCHIVE >  February 2010 Issue >  Electronic Mfg. Products > 
Manncorp: Budget Autoplacer Uses Cut Strips

Willow Grove, PA — Manncorp has introduced a pick-and-place system aimed at OEMs who wish to prototype and perform other short-run PCB assembly in-house. Utilizing newly developed cut-strip feeders, the 7700-FV provides the high precision and versatility needed for placement of today's advanced SMDs ...
Marantz: New Solder Paste Inspection Technology

Eindhoven, Netherlands — Marantz Business Electronics has unveiled a new technology for Solder Print Inspection (SPI) that measurably outperforms all previous approaches. The Marantz PowerSpector S1 SPI system.
 The new product uses a special new "5D" technology that delivers true area, shape, offset, volume and...

Newport Intros Photovoltaic Measuring System

Irvine, CA — Newport Corporation's Oriel® Instruments division has unveiled the Oriel IQE-200, the innovative instrument that permits simultaneous measurements of both the external quantum efficiency (EQE) and the internal quantum efficiency (IQE) of solar cells, detectors, or any photon-to ...
Newport: Micromachining Laser Workstation

Irvine, CA — Newport Corporation is introducing a new micromachining workstation specifically designed for high precision laser direct-writing (LDW) and patterning. The flexible device can be integrated with several lasers to produce 2- or 3-dimensional patterning and writing on virtually any material ...
Nusil Intros Controlled-Volatility Silicone Foam

Carpinteria, CA — NuSil Technology has introduced what it calls the first controlled-volatility silicone foam in the industry. Designed mainly for aerospace, electronics and optic applications where outgassing is a concern, CV-2391 is a low outgassing, room temperature vulcanizing (RTV) foam that ...
Precision Power Screwdriver from General Tools

New York, NY — General Tools & Instruments has introduced its new Power Precision Screwdriver Model #500. The new product fills a definite need in the portable power tools market. The world didn't know how much it needed, and would come to depend on, cordless drill/drivers, until the industry invented ...
ProMik Launches Automatic Flash/IC Tester-Programmer

Nuremberg, Germany — ProMik has launched a new fully automatic flash/IC testing station, the ICTP2000, which is suitable for both stand-alone offline operation as well as for the seamless embedding into SMT production lines. The ICTP2000 fills a void for parallel microcontroller testing and flashing ...
Removable Terminal Carriers from AIC

West Warwick, RI — Peel-A-Way® Removable Terminal Carriers from Advanced Interconnections Corp. are described as the best solution for device socketing and board-to-board interconnect. Compared to traditional molded insulators, the ultra-thin, 0.005-in. (0.13mm) polyimide film carrier, employing near flush ...
Safe Conveyor Intros Easy Access Slide Gate

Swansea, MA — An innovative conveyor system that incorporates a gate mechanism that works like a sliding drawer to open and close without gas springs is being introduced by Safe Conveyor®. This new design, called Slide Gate, is an unusual approach to creating pathways for easy access. \par ...
Sealant Equipment: Meter-Mix Dispense System

Plymouth, MI — Sealant Equipment & Engineering, Inc.'s See-Flo® 1100 is a new and improved fixed-ratio, positive displacement, meter-mix dispense system that is suitable for manual and automated adhesive and sealant applications in the production and assembly of glass, metal, plastic and composite ...
Speedline Intros Dual Head Synch Dispensing

Franklin, MA — Speedline Technologies has introduced a new patent-pending fail-safe approach to simultaneous underfill dispensing using the company's non-contact Camalot SmartStream® dispense pumps. The "synchronous" dispense mode has already proven itself proficient in improving throughput by ...
Sunstone Updates Software with Enhancements

Mulino, OR — Sunstone Circuits has released PCB123® version 3.3 — the next generation of its complete circuit board design solution for the electronics design industry. As with all previous versions, PCB123 is available free of charge.
Techni-Tool Adds Precision Micro-Cutters

Worcester, PA — Techni-Tool has added six new micro-cutter models to its line of Tec-Cut Infinity Elite electronics pliers and cutters. The six new tools allow users to cut electronic wires from 18 to 20 AWG. The cutters have micro-size heads, allowing for reaching into tight spaces, thus providing ...
Viscom Intros Hi-Performance AOI

Hanover, Germany — Viscom has unveiled the newest version of the S3088 system AOI family — optimized for fast, highly accurate solder joint inspection. Inspectable printed circuit board dimensions have been significantly enlarged and the camera technology further improved. The system is delivered with the latest software release, containing even more helpful new functions for inspection operation.
The company's new AOI system is deliberately focused on economical electronic assembly inspection — from prototypes to

Wire & Part Printer from Partex

Elmhurst, IL — Partex Marking Systems North America has introduced the highly anticipated new model in the company's MK-line of marking machines for wire, cable and component marking.
search login

Click here to cancel

You were trying to view a protected page.
Please login to gain access or cancel to go back to the site.
User ID:  
Remember User Name
Stay signed in.

Forgot your password?