Friday, September 30, 2016
VOLUME -24 NUMBER 12
Publication Date: 12/1/2009
Advertisements
Archive >  December 2009 Issue >  Electronic Mfg. Products > 
Acculogic Intros Updated IEEE Support

Woburn, MA — Acculogic Manufacturing Test Systems Division has released the latest version of ScanNavigator software that offers full support for IEEE1149.6, an extension to IEEE1149.1 standard. ScanNavigator software comprises a suite of powerful tools for boundary-scan testing and programming based on ...Read More
Adhesives Research: 2 New Optically Clear Tapes

Glen Rock, PA — Adhesives Research is introducing ARclear® 92400 and ARclear 92469, new optically clear, and electronically clean, pressure-sensitive adhesive (PSA) tapes for bonding surfaces in capacitative touch-screen assemblies.
These new optically clear transfer adhesive tapes provide reliable optical bonds across the entire glass viewing surface of capacitative touch screens...
Read More
Aeroflex Developing PXI Test Solution Phone Chips

Stevenage, UK — Aeroflex will deliver a non-signaling PXI solution customized for RF production line test of Infineon's second-generation ultra low-cost mobile phone platform. The solution, based on the Aeroflex PXI 3000 Series, will test Infineon's second-generation ultra low-cost chipset (X-GOLD ...Read More
Agilent Adds 600MHz Mixed-Signal 'Scopes

Santa Clara, CA — Agilent Technologies Inc. has expanded its mixed-signal and digital-storage oscilloscope portfolio with two lower-cost 600MHz Infiniium 9000 Series models, three new application packages and GPIB compatibility. According to the company, the 9000 Series is the industry's first oscilloscope ...Read More
AIM Intros Jet Printable Solder Paste

Cranston, RI — AIM is introducing NC257MD Jet Printable Solder Paste, the result of a joint development project with MYDATA of Sweden. The solder paste is available direct from AIM or its distributors. It is supplied in syringes with bar coded labels specially designed for the MYDATA MY500 Jet Printer ... Read More
Anver: ESD-Safe Suction Cups

Hudson, MA — A full line of ESD-safe vacuum suction cups for EOAT (end of arm tooling) used in the assembly and manufacture of a wide range of electronic devices is available from Anver Corp.
The Nomastat ESD Vacuum Suction Cups have a 97 KΩ*cm @500V static dissipating value and are molded from a proprietary elastomer that can withstand up to 400°F. Designed for EOAT...
Read More
APS: Improved Pick-and-Place Programming

Huntingdon Valley, PA — APS Novastar, LLC has released its SMTrue Run Optimize off-line programming and management software module. Intended for use with LS, LE, and CS automated SMT pick-and-place machines, the software incorporates Universal CAD Translator with the powerful new functionality of ...Read More
Cartridge Filling System from EFD

Providence, RI — EFD's Atlas Cartridge Filling System is described as a simple, cost-effective way for manufacturers of adhesives, lubricants and other assembly fluids to package their products with greater accuracy at lower cost.
Easy to set up and operate, the new system makes it simple to bottom-fill 2.5-oz. to 32-oz.cartridges with consistent amounts...
Read More
CCI's Tacki Pak Is ESD-Safe

New Hope, MN — Tacki Pak is a part of CCI's family of Cor-Coat ESD materials. Many components and small assemblies are subject to ESD and physical damage as they are handled and stored during the manufacturing process. Tacki Pak provides an ESD-safe, non-adhesive tacky surface that will limit and ...Read More
Cookson Launches Laser Cut Nickel Stencil Line

South Plainfield, NJ — Cookson Electronics Engineered Products, an Alpha, Cookson Electronics business, has launched the Alpha® nickel line of high performance laser cut nickel stencils. Read More
Dow Intros Polymer Polishing Pads

Midland, MI — Dow Electronic Materials has introduced the Optivision 4540 CMP Polishing Pad designed to deliver low defects and low cost of ownership over pad lifetime. The new pad is formulated with a special, surfactant-free, polymer chemistry and pore structure to help minimize defects and ...Read More
Electrolube Non-VOC Conformal Coating Extended

Swadlincote, UK — Electrolube has introduced NVOC conformal coating — a flexible, moisture cure, conformal coating applications. The product has been designed to meet the high performance of solvent-based coatings without the use of VOCs (volatile organic compounds) and with minimal changes to processing parameters. NVOC conformal coating has been tested to many important standards recognized in the electronics industry, proving that it is a viable, special alternative to many standard solvent-based conformal coatings.
Read More
Epoxies Etc: Green Potting Compounds

Cranston, RI — New from Epoxies, Etc., the new Green Series of Polyurethane Potting & Encapsulating Compounds is good for the environment and suitable for electronic assembly applications. These Polyurethane Systems are elastomeric and range in durometer from a gel to Shore 80A. They therefore provide ...Read More
Express Boundary-Scan from JTAG Technologies

Stevensville, MD — JTAG Technologies has added to its line of high-performance boundary-scan IEEE Std. 1149.1 controllers. Known as the DataBlaster JT 37x7/PCIe, the new unit offers support for the now popular PCI-express slot format found extensively in today's PCs. The PCIe bus is a high-speed serial replacement ...Read More
Fisnar: Medical Device Dispensing Valve

Wayne, NJ — The model DV509 Diaphragm Valve from Fisnar Inc. is a lightweight valve designed to dispense low-to-medium viscosity fluids with the important advantage of keeping the wetted parts separated from the operating air supply. This is particularly useful in dispensing Cyanoacrylate, reagents, UV adhesives and aggressive substances. Diaphragm valves with Stainless Steel and UHMW bodies are also available.
Micro shot sizes are fine-tuned using the valve adjustment 
...
Read More
Global Specialties: 32-Channel Logic Analyzer

Cheshire, CT — Global Specialties LLC has introduced its new state-of-the-art 32 channel logic analyzer, the Model 3600. The new logic analyzer accurately analyzes, validates and debugs digital signals while outperforming its higher priced competitors in both features and value. It operates as a ...
Read More
Goepel Integrates JTAG into Polar Flying Prober

Jena, Germany — Goepel electronic and Polar Instruments have jointly developed a next-generation JTAG/Boundary Scan option for the Flying Prober series. The solution is based on a full integration of the hardware architectures ScanBooster® and SCANFLEX® in combination with the JTAG/Boundary Scan system ...Read More
Hemco Modular Clean Rooms with Environmental Controls

Independence, MO — Hemco's ModuLab is a custom-designed enclosure with control systems that meet a variety of environmental and class clean requirements. It is the appropriate choice for laboratory and industrial applications such as Cleanrooms, C.M.M. Rooms, Walk-in Mini Labs, Pilot Plant, Hazardous ...Read More
Laird Releases Thermal Management Application Note

St. Louis, MO — Laird Technologies, Inc. has released its new application note titled "Thermoelectric Assemblies for Medical Applications." The application note is the first in a series of notes describing the role of thermal management in numerous market segments.Read More
Manncorp: 5-Second Online Price Quotes

Willow Grove, PA — Manncorp has added new products and created a new product nomenclature that includes the newly revised and streamlined website for 5-second online price quotes. Acceding to the reality that price plays a predominant part in the selection of PCB assembly equipment, the website has  been redesigned to furnish a quotation on any product within five seconds. This landmark feature, reportedly unique to Manncorp, is activated whenever ...
Read More
 
 
search login