Save. Share. Connect.
Tuesday, August 30, 2016
VOLUME - NUMBER
SEMICON West '16
Atlantic Design/ATX/MDM '16
NEPCON China,SMT/Hybrid Pkg,EDS,EWPTE '16
ATX/MDM West '16
productronica,The ASSEMBLY Show, IMAPS, MDM/Minneapolis '15
Nepcon South China '15
SEMICON West '15
ATX/MDM EAST '15
EDS, SMT/Hybrid Pkg,Wire Tech Expo '15
NEPCON China '15
ATX WEST/APEX '15
AATE and IPC MW 11
SMTAI, Autotest, ATX MW/MDM and Assembly '14
SEMICON West '13
Electronics West/MDM and IPC/APEX '13
SEMICON West '14
NEPCON China, SMT/Hybrid Pkg, EDS, NWPTE '14
IPC APEX '14
Electronics West/MDM 10
ATX Midwest, IMAPS, PCB West '13
ATX West '14
ATExpo & IPC MW 07
NEPCON China '13, EDS, more
SEMICON WEST/Intersolar '12
NEPCON China Product Preview '12
Atlantic Design/MDM 10
Electronics West/MDM 11
SEMICON WEST 10
Atlantic Design/MDM 11
ATLANTIC DESIGN & MFG '13
Atlantic Design/MDM 09
SEMICON WEST 08
NEPCON South China '13
ATExpo & IPC MW 08
Electronics West/MDM 08
NEPCON China Product Preview '13
Electronic West/MDM 09
SMTAI and productronica '13
Multi tradeshow Product Preview '12
AATE/IPC Midwest 10
Electronics West/MDM 12
ATE and IPC MW 09
SMTAI and productronica '13
Atlantic Design/MDM 08
HOME / CURRENT ISSUE
ATE and IPC MW 09
Schleuniger: Rotary Coax Stripping Machine
Manchester, NH — 30 percent faster processing of micro-coaxial cables is possible the Schleuniger's CoaxStrip 5300 RX. The machine strips extremely small micro-coaxial cables with center conductors down to 42 AWG (0.003-in./0.0762mm) in diameter. Its new high-speed rotary stripping head guarantees ...
Gen3 SMT Stencil Aperture Cleaner from Ascentech
Chester, CT — Ascentech is showing the new Ultrasonic SMT Stencil Aperture cleaner, Gensonic — manufactured by GEN3 Systems, The system is a manually operated ultrasonic generator equipped with a single 40kHz transducer unit for cleaning stencils used in printing solder pastes. An additional transducer ...
Rogers Intros Lite Laminates for Low-Loss Antennas
Chandler, AZ — The Advanced Circuit Materials (ACM) Division of Rogers Corp. has introduced RO4730
laminates for base station, RFID and other antenna designs. The new laminate materials combine low-loss dielectric with low-profile copper foil for reduced passive intermodulation (PIM ...
Schunk Intros CELSIO Shrink-Fit Tooling
Morrisville, NC — Schunk is offering a line of shrink-fit tooling — CELSIO toolholders, which reportedly deliver a high degree of flexibility and almost unlimited options for combining shrinking chucks and extensions. The adjustable tooling is especially suitable for a wide range of applications ...
New Renishaw Software for Fast 5-axis Measurement
Hoffman Estates, IL — Renishaw's new MODUS
CMM software application combines with the company's UCC2 universal CMM controller and full range of sensors, including the REVO
5-axis measuring system, to form a single-source CMM retrofit package. MODUS provides a powerful platform for 5-axis ...
Omron: Wireless Serial Comm System
Schaumburg, IL — Omron Electronics LLC has solved a difficult data gathering issue in industrial automation with the WT30 Wireless Serial Communications system. It eliminates barriers to communicating with moving equipment, retrofitting networking on running devices, and evading obstacles where wiring ...
Miyachi Unitek Unveils Green Laser Welder
Monrovia, CA — Miyachi Unitek has released its new LW5AG green laser welder. The new 5W laser offers increased weld speed (2.5x), penetration (~30 percent) and integration flexibility (2 energy- or time-share outputs) over the previous 2W model.
Metris Software Doubles CT Reconstruction Speed
Brighton, MI — Metris is launching Inspect-X 1.6 software that boosts throughput by increased CT reconstruction speed and improved general system control. Following the company's drive for continual X-ray and CT system improvement, the new software version further enhances system usability and introduces ...
Master Intros New Heat Gun
Racine, WI — Master Appliance Corp. is introducing its new Proheat
Heat Gun with a momentary contact safety switch. Eliminating potential hazards caused by heat guns being left on by mistake, the new heat gun will operate only when the spring-loaded switch is being held by the ...
Magid Intros Pink Disposable Earplugs
Chicago, IL — Magid Glove & Safety teams up with the National Breast Cancer Foundation (NBCF) to advance the fight against breast cancer with the introduction of Magid
IHP732 Pink Disposable Earplugs. Benefiting from the same plush comfort, quality hearing protection, and economical price ...
Kistler Intros Multicomponent Dynamometer
Amherst, NY — New dynamometer Type 9129AA from Kistler Instrument Corp. has an impressively low overall height of 32mm and large measuring range of up to ±10kN. With cover plate of 95 x 105mm in size, this dynamometer is used for measuring the three components of the resultant force vector and ...
Auto Contacting Extensometer New from Instron
Norwood, MA — Instron
is introducing the MFX 500 automatic contacting extensometer. This universal, high-resolution instrument is ruggedly constructed to make it suitable for almost any application that requires the measurement of linear strain. The extensometer is used to determine a variety ...
New Tacky Flux Technology from Henkel
Irvine, CA — Henkel describes its new Multicore
as a breakthrough for emerging package-on-package (POP) device processes. The new no-clean, halide-free tacky flux material has been formulated specifically for today's challenging POP applications.
Galaxy Thin Wafer System from DEK
Rolling Meadows, IL — Building on its Galaxy imaging platform, DEK has used the foundation of the technology's supreme accuracy and precision to develop a system specifically for processing thinned silicon wafers. The new Galaxy Thin Wafer System offers exceptional stability, enhanced process capability ...
Screw Dispenser from DTI
Conover, NC — Design Tool, Inc.'s screw dispenser is designed to drop a pre-determined number of fasteners into a dispensing cup which will then drop the parts into the user's hand. This gives the operator the correct number of fasteners to put into a particular part and also provides accountability ...
Creform Intros Versatile Cantilevered Arm Cart
Greer, SC — The new Cantilevered Arm Cart from Creform Corporation provides a versatile, cost-effective and ergonomic solution to many parts storage, transport and presentation challenges. It has two levels of sturdy cantilevered arms that can be used as shelves to support long parts. And for parts ...
ASYS Intros Laser Marking System
Atlanta, GA — ASYS is introducing its in-line laser marking system BLS 01, which is designed to mark codes, images and clear text directly into the solder resist. The laser and the galvo head are mounted above a conveyor on a programmable X/Y-gantry. The PCB is clamped and secured while the laser ...
ASG: Assembly and Industrial Solutions
Cleveland, OH — ASG, a division of Jergens, Inc., is showing its comprehensive offering of products for light assembly and CE-certified industrial tools for fastening, cutting, finishing. New products featured at the show include the patent pending GEN-II Pneu-Aira
Error Proofing System for Pneumatic Assembly ...
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | firstname.lastname@example.org
powered by GIM