Wednesday, June 20, 2018

Home/Current Issue >  Product Previews >  ATE and IPC MW 09 > 

Zeiss Adds Functions to Confocal Microscope

Thornwood, NY — Carl Zeiss, Inc. is introducing new functions for the Axio CSM 700 microscope. The new functions of the confocal light microscope enable materials scientists to measure the 3D topography over large sample areas with more convenience and flexibility.

Read More

Promess Adds New of Hollow-Shaft Torque Test Systems

Brighton, MI — Promess, Inc. has added a series of hollow-shaft units to its line of Torque Functional Test (TFT) systems intended for intelligent assembly applications. Based on direct drive rotary motor technology, the new TFT-HS series permits users to access components with tools and/or sensors ...
Read More

Zestron Bath Analyzer Boosts Reliability

Manassas, VA — Zestron America has introduced a newly developed bath concentration-monitoring tool, the Zestron Bath Analyzer, which helps to eliminate unreliable bath control measurements. The analyzer was developed as an alternative method to the refractive index and is confirmed to be...
Read More

Rogers Intros Low-Noise EL Lamp Driver IC

Chandler, AZ — Rogers Corporation's Durel Division has added a new high-performance electroluminescent (EL) lamp driver integrated circuit (ICs), the D392A. The new driver delivers the programmable output voltages needed to power a wide range of EL lamps, including in portable applications such as
cellular telephones, data organizers and PDAs, remote controls, monochrome LCDs, and DFLX EL keypad lamps.

Read More

Qualitek: No-Clean Lead-Free Solder Paste

Addison, IL — Qualitek International, Inc. has developed DSP 866 Solder Paste with the lowest possible level of total Halogens at 0 percent ppm. The new solder paste is a lead-free no-clean formulation available in a variety of popular lead-free alloys. Flux Classification is ROL0 per JSTD-004, and ...
Read More

Jergens Adds Precision Machine Vises

Cleveland, OH — Jergens has added Precision Machine Vises to complement its Workholding Components product line. The new vises are suitable for prototyping and tool room applications as opposed to high-volume production operations for which the existing Jergens line is used.
Read More

Vision Engineering Intros Video Microscope

New Milford, CT — Vision Engineering's new Falcon 3-axis non-contact video measuring system is reportedly "packed" with massive technical capabilities, delivering performance usually found only on systems costing many times the price.
Read More

Start Upgrades Electronic Tape Dispenser

Addison, TX — Start International has revamped the zcM1000 (M1000): the original electronic automatic industrial tape dispenser. Providing the widest range of capabilities for increased productivity to the customer, the new zcM1000 is now equipped to dispense some of the thinner tape materials on ...
Read More

Schleuniger Intros Auto Crimping Machine

Manchester, NH — The new Schleuniger CrimpCenter 36 fully automatic crimping machine combines high precision technology with a compact new design for maximum efficiency. The new machine complements the field-proven high performance 6-Series with the...

Read More

Programmable Mag Encoder Chip from Renishaw

Hoffman Estates, IL — Renishaw's new AM4096 On-Axis magnetic encoder provides 4096-counts/rev of absolute position feedback for high-speed digital motor and motion control applications. A non-contact 12-bit IC with no moving parts and programmable zero position, it delivers accuracy of 0.1 degrees, at speeds up to 60,000 rpm, making it suitable for commutation, high-speed motor control, position/velocity control, and replacement of potentiometers and optical encoders.
The encoder is a low-power 3.3V...

Read More

Microscan: Turnkey Optical Inspection Solution

Renton, WA — Microscan is introducing the new I-PAK® SE optical inspection system, called the only complete turnkey solution designed specifically for pharmaceutical lot tracking and validation. As a complete and easy-to-use package, the inspection system maximizes efficiency and ease of use while ...
Read More

Master Intros Butane Microtorch

Racine, WI — Master Appliance Corp. is introducing its new Model MT-70 Butane-powered Microtorch. This durable, compact torch has a fuel adjustment wheel to provide 2,500°F pinpoint or broad blue torch flame. A self-igniting piezo-electric ignition makes the torch easy to start and eliminates the ...
Read More

Meter Mix Dispensing from I+J Fisnar

Fair Lawn, NJ — I&J Fisnar, Inc. removes the mystery of metering and mixing and helps to step through the process of selecting a Meter Mix solution. The company's systems are designed for continuous operation and with the IJF guarantee of service, the user can be assured of excellent product support ...

Read More

Multicore: Versatile New Lead-Free Solder Paste

Irvine, CA — Henkel has engineered Multicore® LF700, a new lead-free, halide-free solder paste that has been formulated to deliver a wider range of benefits and performance characteristics than older-generation and competitive products.
Read More

Creform: Versatile Mobile Flow Racks

Greer, SC — Mobile flow racks with new Placon conveyors from Creform Corporation can enhance the efficiency, flexibility and ergonomics of parts presentation in a manufacturing workstation or cell as well as warehouse order-picking and kitting operations.
Read More

Robotic Integrated Dispense System from Sealant

Plymouth, MI — Sealant Equipment & Engineering, Inc.'s new Servo-Flo® 404-IDS dispensing system is incorporated into Motoman's Integrated Dispense System using the series MH or ES 6-axis robot. The Servo-Flo meter's servo drive, Yaskawa encoder and supply pump system controls are integrated into ...

Read More

Digitaltest: New Rack System, New Services

Stutensee, Germany — Digitaltest's new MTS30 is a 19-in. rack-mountable in-circuit test system that offers the ability to perform both analog and digital tests in a chassis that can be configured in a "rack and stack" mode. Users of National Instruments LabVIEW and TestStand as well as PXI can now ...
Read More

ACE Intros "SMART" Conveyor

Spokane, WA — ACE Production Technologies, Inc. is introducing its new SMART Conveyor that controls PCB warpage during the selective soldering process. The conveyor was developed in response to the continuous challenges of selective soldering process development.
Read More

InduKey Intros First Carbon-Fiber Keyboard

Leonia, NJ — InduKey has extended its innovative line of InduKeyboards with the introduction of InduDur — the world's first carbon-fiber keyboard for applications that require a high degree of durability.
Read More

Viscom: New Desktop AOI System

Duluth, GA — New from Viscom is its S2088-II desktop AOI inspection system. This new system is equipped with automatic paste print, pre- and post-reflow and THT solder joint inspection. The system now includes high-performance 8M camera technology, with the same angled inspection and OnDemandHR function ...
Read More
search login