Save. Share. Connect.
Saturday, September 23, 2017
VOLUME - NUMBER
NEPCON South China '17
ATX East / MD&M '17
SEMICON WEST '17
NEPCON China, SMT/Hybrid Pkg, EWPTE, EDS '17
ATX West and IPC APEX '17
ADM Cleveland and APEC '17
SMTAI and IMAPS '16
SEMICON West '16
NEPCON China '15
ATX WEST/APEX '15
SMTAI, Autotest, ATX MW/MDM and Assembly '14
AATE and IPC MW 11
Electronics West/MDM and IPC/APEX '13
SEMICON West '14
IPC APEX '14
NEPCON China Product Preview '12
SEMICON WEST 10
Electronics West/MDM 11
Atlantic Design/MDM 11
ATLANTIC DESIGN & MFG '13
SEMICON WEST 08
Electronics West/MDM 08
NEPCON China Product Preview '13
Multi tradeshow Product Preview '12
ATE and IPC MW 09
Electronics West/MDM 12
NEPCON South China '16
Atlantic Design/ATX/MDM '16
NEPCON China,SMT/Hybrid Pkg,EDS,EWPTE '16
ATX/MDM West '16
productronica,The ASSEMBLY Show, IMAPS, MDM/Minneapolis '15
SEMICON West '15
Nepcon South China '15
EDS, SMT/Hybrid Pkg,Wire Tech Expo '15
ATX/MDM EAST '15
SEMICON West '13
NEPCON China, SMT/Hybrid Pkg, EDS, NWPTE '14
Electronics West/MDM 10
ATX Midwest, IMAPS, PCB West '13
ATX West '14
ATExpo & IPC MW 07
NEPCON China '13, EDS, more
SEMICON WEST/Intersolar '12
Atlantic Design/MDM 10
Atlantic Design/MDM 09
ATExpo & IPC MW 08
NEPCON South China '13
Electronic West/MDM 09
SMTAI and productronica '13
AATE/IPC Midwest 10
SMTAI and productronica '13
Atlantic Design/MDM 08
ATE and IPC MW 09
Zeiss Adds Functions to Confocal Microscope
Thornwood, NY — Carl Zeiss, Inc. is introducing new functions for the Axio CSM 700 microscope. The new functions of the confocal light microscope enable materials scientists to measure the 3D topography over large sample areas with more convenience and flexibility.
Promess Adds New of Hollow-Shaft Torque Test Systems
Brighton, MI — Promess, Inc. has added a series of hollow-shaft units to its line of Torque Functional Test (TFT) systems intended for intelligent assembly applications. Based on direct drive rotary motor technology, the new TFT-HS series permits users to access components with tools and/or sensors ...
Zestron Bath Analyzer Boosts Reliability
Manassas, VA — Zestron America has introduced a newly developed bath concentration-monitoring tool, the Zestron Bath Analyzer, which helps to eliminate unreliable bath control measurements. The analyzer was developed as an alternative method to the refractive index and is confirmed to be...
Rogers Intros Low-Noise EL Lamp Driver IC
Chandler, AZ — Rogers Corporation's Durel Division has added a new high-performance electroluminescent (EL) lamp driver integrated circuit (ICs), the D392A. The new driver delivers the programmable output voltages needed to power a wide range of EL lamps, including in portable applications such as
cellular telephones, data organizers and PDAs, remote controls, monochrome LCDs, and DFLX
EL keypad lamps.
Qualitek: No-Clean Lead-Free Solder Paste
Addison, IL — Qualitek International, Inc. has developed DSP 866 Solder Paste with the lowest possible level of total Halogens at 0 percent ppm. The new solder paste is a lead-free no-clean formulation available in a variety of popular lead-free alloys. Flux Classification is ROL0 per JSTD-004, and ...
Jergens Adds Precision Machine Vises
Cleveland, OH — Jergens has added Precision Machine Vises to complement its Workholding Components product line. The new vises are suitable for prototyping and tool room applications as opposed to high-volume production operations for which the existing Jergens line is used.
Vision Engineering Intros Video Microscope
New Milford, CT — Vision Engineering's new Falcon 3-axis non-contact video measuring system is reportedly "packed" with massive technical capabilities, delivering performance usually found only on systems costing many times the price.
Start Upgrades Electronic Tape Dispenser
Addison, TX — Start International has revamped the zcM1000 (M1000): the original electronic automatic industrial tape dispenser. Providing the widest range of capabilities for increased productivity to the customer, the new zcM1000 is now equipped to dispense some of the thinner tape materials on ...
Schleuniger Intros Auto Crimping Machine
Manchester, NH — The new Schleuniger CrimpCenter 36 fully automatic crimping machine combines high precision technology with a compact new design for maximum efficiency. The new machine complements the field-proven high performance 6-Series with the...
Programmable Mag Encoder Chip from Renishaw
Hoffman Estates, IL — Renishaw's new AM4096 On-Axis
magnetic encoder provides 4096-counts/rev of absolute position feedback for high-speed digital motor and motion control applications. A non-contact 12-bit IC with no moving parts and programmable zero position, it delivers accuracy of 0.1 degrees
, at speeds up to 60,000 rpm, making it suitable for commutation, high-speed motor control, position/velocity control, and replacement of potentiometers and optical encoders.
The encoder is a low-power 3.3V...
Microscan: Turnkey Optical Inspection Solution
Renton, WA — Microscan is introducing the new I-PAK
SE optical inspection system, called the only complete turnkey solution designed specifically for pharmaceutical lot tracking and validation. As a complete and easy-to-use package, the inspection system maximizes efficiency and ease of use while ...
Master Intros Butane Microtorch
Racine, WI — Master Appliance Corp. is introducing its new Model MT-70 Butane-powered Microtorch. This durable, compact torch has a fuel adjustment wheel to provide 2,500°F pinpoint or broad blue torch flame. A self-igniting piezo-electric ignition makes the torch easy to start and eliminates the ...
Meter Mix Dispensing from I+J Fisnar
Fair Lawn, NJ — I&J Fisnar, Inc. removes the mystery of metering and mixing and helps to step through the process of selecting a Meter Mix solution. The company's systems are designed for continuous operation and with the IJF guarantee of service, the user can be assured of excellent product support ...
Multicore: Versatile New Lead-Free Solder Paste
Irvine, CA — Henkel has engineered Multicore
, a new lead-free, halide-free solder paste that has been formulated to deliver a wider range of benefits and performance characteristics than older-generation and competitive products.
Creform: Versatile Mobile Flow Racks
Greer, SC — Mobile flow racks with new Placon conveyors from Creform Corporation can enhance the efficiency, flexibility and ergonomics of parts presentation in a manufacturing workstation or cell as well as warehouse order-picking and kitting operations.
Robotic Integrated Dispense System from Sealant
Plymouth, MI — Sealant Equipment & Engineering, Inc.'s new Servo-Flo
404-IDS dispensing system is incorporated into Motoman's Integrated Dispense System using the series MH or ES 6-axis robot. The Servo-Flo meter's servo drive, Yaskawa encoder and supply pump system controls are integrated into ...
Digitaltest: New Rack System, New Services
Stutensee, Germany — Digitaltest's new MTS30 is a 19-in. rack-mountable in-circuit test system that offers the ability to perform both analog and digital tests in a chassis that can be configured in a "rack and stack" mode. Users of National Instruments LabVIEW and TestStand as well as PXI can now ...
ACE Intros "SMART" Conveyor
Spokane, WA — ACE Production Technologies, Inc. is introducing its new SMART Conveyor that controls PCB warpage during the selective soldering process. The conveyor was developed in response to the continuous challenges of selective soldering process development.
InduKey Intros First Carbon-Fiber Keyboard
Leonia, NJ — InduKey
has extended its innovative line of InduKeyboards with the introduction of InduDur
— the world's first carbon-fiber keyboard for applications that require a high degree of durability.
Viscom: New Desktop AOI System
Duluth, GA — New from Viscom is its S2088-II desktop AOI inspection system. This new system is equipped with automatic paste print, pre- and post-reflow and THT solder joint inspection. The system now includes high-performance 8M camera technology, with the same angled inspection and OnDemandHR function ...
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | firstname.lastname@example.org
powered by GIM