Save. Share. Connect.
Monday, February 20, 2017
VOLUME -24 NUMBER 9
Publication Date: 09/1/2009
Front Page News
People in the News
Electronic Mfg. Services
Electronic Mfg. Products
Special Features: PCB and Assembly
Product Preview: ATE and IPC Midwest
September 2009 Issue
Add Message Board
Keyence Intros Digital Contact Sensor
Digital contact sensor.
Woodcliff Lake, NJ — The 2nd generation KEYENCE GT2, "All-in-One" contact digital sensor, adopts the world's first scale-shot system to provide the highest precision in its class (0.1µ resolution, 1.0µ accuracy). Maintaining the "No Error" feature from its predecessor, no data will be lost due to rapid spindle movement during production line and other high-speed applications. All measurement is performed in the compact GT amplifier requiring no PLC or external data processing.
The new sensors are tough and rugged, and the cable's IP67 water resistant enclosure rating helps prevent or reduce swap-outs in select harsh environments. The sensor head cable uses a flexible robot cable that can withstand continuous bending up to 6 million times at a radius of 50mm (1.97-in.), and can be cut anywhere to length. Linear ball bearings covered by a strong rubber, encase the spindle to ensure a long service life by eliminating wear and abrasion damage. Detection durability extends up to 20 million times.
Simple tolerance setting at the touch of a pushbutton reduces the number of steps compared with conventional models. A variety of displays, brackets, and mounts (DIN-rail, compact panel, large display panel, and pulse output) are available to accommodate user needs to simplify amplifier installation and setup. Large indicators on the display are convenient for setting up several units, and also helpful to determine OK/NG connections at a quick glance.
A single unit can connect up to 11 sensor heads for a space-saving compact installation. When several amplifiers are connected, the GT2 Series enables automatic calculation simply by selecting a calculation mode. Versatile detection modes support all applications such as measuring the degree of flatness, thickness, warpage, twist, maximum, minimum, and average.
The analog I/O card used with conventional sensors is not required for the GT2, which further reduces labor time and total cost. Equipment status can be quickly checked by looking at the bar indicator that displays green when the data is within its limits, and red when the values are out of spec.
Contact: Keyence Corporation of America, 50 Tice Boulevard, Woodcliff Lake, NJ 07677
888-539-3623 ext 70703 fax: 201-930-1883 Web:
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | firstname.lastname@example.org
powered by GIM