Saturday, May 28, 2016
VOLUME -24 NUMBER 8
Publication Date: 08/1/2009
Advertisements
ARCHIVE >  August 2009 Issue >  Electronic Mfg. Products > 

Multi-Seals Intros Ultra-Mini Epoxy Preforms
Nano-forms ultra-mini epoxy preforms.
Manchester, CT — Multi-Seals Inc. is introducing Nano-forms epoxy preforms to provide precision seals on microelectronics. With preforms as small as 0.035-in. (0.89mm) outside diameter and 0.011-in. (0.28mm) inside diameter, Nano-forms allow highly repeatable placement of minute amounts of epoxy with precision that is unattainable with traditional dispensing methods.

With dimensional tolerances as close as ±0.0005-in. (±0.013mm) for critical applications, the epoxy preforms can control epoxy volume to within 0.00002cc for a typical configuration. Exceptional repeatability is further promoted with closely controlled pre-mixed ratios of resin to catalyst.

In addition, Nano-forms are not affected by pot life, so epoxy viscosity is consistent from beginning to end of production batch. This combination of precision and consistency makes the epoxy preforms suitable for sealing fiber-optics and subminiature switches, capacitors, diodes, LEDs, and other microminiaturized components. Like other Uni-forms epoxy preforms, Nano-forms are pre-shaped, one-part resins that are solid at room temperature. When heated, Nano-forms melt and cure, forming a consistent seal that protects components from dust, moisture, oil, flux, solvents, conformal coatings, and other contaminants.

Contact: Multi-Seals Inc., 540 North Main Street, Manchester, CT 06042 860-643-7188 fax: 860-643-5669 E-mail: sales@multi-seals.com Web:
http://www.multi-seals.com

 
 
search login