Save. Share. Connect.
Tuesday, July 26, 2016
VOLUME -24 NUMBER 8
Publication Date: 08/1/2009
Front Page News
People in the News
Electronic Mfg. Services
Electronic Mfg. Products
Special Features: Test and Measurement
Product Preview: ATE and IPC Midwest
August 2009 Issue
Add Message Board
NKK Adds Illuminated Outer Ring Option
Illuminated pushbutton switch.
Scottsdale, AZ — NKK Switches has expanded its YB2 Series of illuminated 22mm pushbuttons to include an outer ring illumination option. This new feature gives design engineers even greater ability to customize the switches that they include in their designs.
The new outer ring illumination option is achieved by adding a cap that has a luminous bright outer ring surrounding a metallic silver center. This option is available in all the bright and super bright LED colors offered in the YB2 Series product line, including blue, green, red, white and amber. These LED colors are diffused through a clear outer ring, framing the metallic silver center in a halo of light. Custom legends on the cap are also available.
The YB2 pushbuttons are tamper-resistant, flush mount, with panel seal and have a super-low profile. The dust-tight and splash-proof panel seal design protects the YB2 Series against low pressure jets of water from all directions and meets IP65 of IEC60529 standards. The illuminated models have built-in ballast resistors.
Design engineers can choose either power rated or logic level options. Ratings are 3A at 125VAC, 3A at 250VAC or 3A at 30VDC for power models with silver contacts, and 0.4VA maximum at 28VAC/DC maximum for logic level versions with gold contacts. Available in SPDT and DPDT momentary and maintained action, the switches provide crisp actuation because of the snap-action contact mechanism. Contacts are provided with both normally open and normally closed configurations.
According to the company, the 1.8mm height gives the devices one of the shortest above-panel dimensions in the industry. Unique among its competitors, the YB2 Series exhibits a short behind-the-panel body measuring only 24.5mm. In addition, the switches have a tamper-resistant 19mm actuator with a distinctive long stroke and user-friendly actuation. Terminals are combination solder lug and 0.110-in. quick connect. The epoxy seal locks out flux, dust, solvents and other contaminants, while securing the terminals for contact stability.
These switches have a flammability rating of UL94V0 and are cULus Recognized. Mechanical life is given at 1,000,000 operations minimum for momentary circuits, and 200,000 operations minimum for maintained circuits. Electrical life is 100,000 operations minimum.
Contact: NKK Switches, 7850 E. Gelding Dr., Scottsdale, AZ 85260
480-991-0942 fax: 480-998-1435 Web:
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | firstname.lastname@example.org
powered by GIM