Save. Share. Connect.
Tuesday, May 23, 2017
VOLUME -24 NUMBER 6
Publication Date: 06/1/2009
Front Page News
People in the News
Electronic Mfg. Services
Electronic Mfg. Products
Special Features: Components and Distribution
Product Preview: Atlantic Design/MDM
June 2009 Issue
Add Message Board
Tyco Intros Inverted LED SMT Thru-Board Connector
Inverted thru-board connecter.
Harrisburg, PA — New inverted SMT thru-board connector from Tyco allows power from underside of boards. The SMT thru-board connector provides a means to bring power from the underside of an FR4 or aluminum-clad PC board, eliminating issues of dressing wires on the top side of LED boards.
The 2-through-6-position connector surface-mounts on the top of the board, passing through the board to present an underside interface. The connector mates with standard Mini CT connectors. The inverted design allows simpler assembly and installation of solid-state LED lighting in architectural, residential, and commercial applications. The Mini CT connector is rated for 3 amps per contact, on 24 AWG wire.
With a space-saving low-profile design and rounded corners to minimize shadowing, the connector fits through a hole or notch in the board.
High-temperature materials allow the connector to be reflow soldered, while a flat top surface provides compatibility with vacuum pickup. The connector uses surface-mount hold-downs to provide stability during mating and unmating.
With UL Listing and CSA Certification, the connectors meet the requirements of UL 1977, File No. E2847.
Contact: Tyco Electronics, P.O. Box 3608, MS 38-41, Harrisburg, PA 17105-3608
800-522-6752 or 215-657-6202 E-mail:
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | email@example.com
powered by GIM