Save. Share. Connect.
Saturday, May 28, 2016
VOLUME - NUMBER
NEPCON China,SMT/Hybrid Pkg,EDS,EWPTE '16
ATX/MDM West '16
productronica,The ASSEMBLY Show, IMAPS, MDM/Minneapolis '15
Nepcon South China '15
SEMICON West '15
ATX/MDM EAST '15
EDS, SMT/Hybrid Pkg,Wire Tech Expo '15
NEPCON China '15
ATX WEST/APEX '15
AATE and IPC MW 11
SMTAI, Autotest, ATX MW/MDM and Assembly '14
SEMICON West '13
Electronics West/MDM and IPC/APEX '13
SEMICON West '14
NEPCON China, SMT/Hybrid Pkg, EDS, NWPTE '14
IPC APEX '14
Electronics West/MDM 10
ATX Midwest, IMAPS, PCB West '13
ATX West '14
ATExpo & IPC MW 07
NEPCON China '13, EDS, more
SEMICON WEST/Intersolar '12
NEPCON China Product Preview '12
Atlantic Design/MDM 10
Electronics West/MDM 11
SEMICON WEST 10
Atlantic Design/MDM 11
ATLANTIC DESIGN & MFG '13
Atlantic Design/MDM 09
SEMICON WEST 08
NEPCON South China '13
ATExpo & IPC MW 08
Electronics West/MDM 08
NEPCON China Product Preview '13
Electronic West/MDM 09
SMTAI and productronica '13
Multi tradeshow Product Preview '12
AATE/IPC Midwest 10
Electronics West/MDM 12
ATE and IPC MW 09
SMTAI and productronica '13
Atlantic Design/MDM 08
HOME / CURRENT ISSUE
Add Message Board
Dage Intros Digital X-Ray Inspection System
Digital x-ray inspection system.
Fremont, CA — Dage Precision Industries, a Nordson company, is introducing its new XD7600NT100 digital x-ray inspection system. This new system is described as the most technologically advanced x-ray inspection system on the market today with groundbreaking 100 nanometer (0.1 micron) feature recognition for finite analysis of the most challenging inspection applications.
Equipped with a 2 Mega pixel imaging system, the unit offers oblique angle viewing of up to 70° in any position around any point of a 16 x 18-in. (407 x 458mm) inspection area without compromising system magnification.
The new x-ray system combines the superior digital acquisition technology of the company's XiDAT 2.0 imaging system with the easy-to-use ImageWizard software for world-class inspection quality. It is configured with dual monitors allowing operators to view the all-important x-ray image on a 24-in. widescreen LCD monitor while at the same time providing a highly detailed, full screen display of the navigation map on a 20-in. flat panel LCD display.
The system is available with a high-power tube that combines 10 watts of power and sub-micron feature recognition. Unlike existing high power tubes that have to significantly compromise resolution when used at higher power levels, this new high-power tube retains sub-micron feature recognition at full power.
As an option, the system can be equipped with computerized tomography (CT) providing 3D modeling and volumetric measurement of solder joints, especially suited to analytical analysis of solder interconnections for critical applications such as stacked die, MEMS, package-in-package and package-on-package.
Contact: Dage Precision Industries, Inc., 48065 Fremont Blvd., Fremont, CA 94538-6541
See at APEX Booth #1725.
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | firstname.lastname@example.org
powered by GIM