Save. Share. Connect.
Tuesday, July 26, 2016
VOLUME - NUMBER
SEMICON West '16
Atlantic Design/ATX/MDM '16
NEPCON China,SMT/Hybrid Pkg,EDS,EWPTE '16
ATX/MDM West '16
productronica,The ASSEMBLY Show, IMAPS, MDM/Minneapolis '15
Nepcon South China '15
SEMICON West '15
ATX/MDM EAST '15
EDS, SMT/Hybrid Pkg,Wire Tech Expo '15
NEPCON China '15
ATX WEST/APEX '15
AATE and IPC MW 11
SMTAI, Autotest, ATX MW/MDM and Assembly '14
SEMICON West '13
Electronics West/MDM and IPC/APEX '13
SEMICON West '14
NEPCON China, SMT/Hybrid Pkg, EDS, NWPTE '14
IPC APEX '14
Electronics West/MDM 10
ATX Midwest, IMAPS, PCB West '13
ATX West '14
ATExpo & IPC MW 07
NEPCON China '13, EDS, more
SEMICON WEST/Intersolar '12
NEPCON China Product Preview '12
Atlantic Design/MDM 10
Electronics West/MDM 11
SEMICON WEST 10
Atlantic Design/MDM 11
ATLANTIC DESIGN & MFG '13
Atlantic Design/MDM 09
SEMICON WEST 08
NEPCON South China '13
ATExpo & IPC MW 08
Electronics West/MDM 08
NEPCON China Product Preview '13
Electronic West/MDM 09
SMTAI and productronica '13
Multi tradeshow Product Preview '12
AATE/IPC Midwest 10
Electronics West/MDM 12
ATE and IPC MW 09
SMTAI and productronica '13
Atlantic Design/MDM 08
HOME / CURRENT ISSUE
Add Message Board
Goepel Intros Boundary Scan Platform
Board Grabber JTAG test fixture.
Jena, Germany — Goepel electronic is introducing a series of universal board fixtures for its Boundary Scan hardware platform, Scanflex
. The new generation of fixtures is called Scanflex Board Grabber
and is comprised of three models in different sizes.
According to the company, complex boards present special difficulties in design verification while still in the development stage. The new Board Grabber not only solves this problem but offers the possibility of generating signal probing easily and reliably. The Board Grabber was specifically designed to support laboratory verification and zprogramming of prototypes. It is also applicable at repair stations, and includes a width-adapting fixture, which can hold PC boards of different sizes.
While the L-version can hold boards of 300 x 300mm, the XL-version allows dimensions of 495 x 340mm and the XXL-version dimensions of 555 x 440mm. An integral pivoting mechanism makes it possible to reach both the top and bottom of the board.
The product has pre-assembled interfaces for Scanlex TAP transceivers, which provide IEEE1149.x TAP signals along with analog and digital channels. Up to eight independent parallel TAP signals are supported.
Board contacts can be handled by clips, probes or precast connection cables, and the Board Grabber allows the use of up to 50 needle probes on each side of the board.
Contact: Goepel electronics LLC, 45209 Helm Street, Plymouth, MI 48170
408-691-4679 fax: 512-502-3076 Web:
See at APEX Booth #849.
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | firstname.lastname@example.org
powered by GIM