Save. Share. Connect.
Wednesday, August 23, 2017
VOLUME - NUMBER
NEPCON South China '17
SEMICON WEST '17
ATX East / MD&M '17
NEPCON China, SMT/Hybrid Pkg, EWPTE, EDS '17
ADM Cleveland and APEC '17
ATX West and IPC APEX '17
SMTAI and IMAPS '16
SEMICON West '16
NEPCON China '15
ATX WEST/APEX '15
AATE and IPC MW 11
SMTAI, Autotest, ATX MW/MDM and Assembly '14
Electronics West/MDM and IPC/APEX '13
SEMICON West '14
IPC APEX '14
NEPCON China Product Preview '12
Electronics West/MDM 11
SEMICON WEST 10
Atlantic Design/MDM 11
ATLANTIC DESIGN & MFG '13
SEMICON WEST 08
Electronics West/MDM 08
NEPCON China Product Preview '13
Multi tradeshow Product Preview '12
Electronics West/MDM 12
ATE and IPC MW 09
NEPCON South China '16
Atlantic Design/ATX/MDM '16
NEPCON China,SMT/Hybrid Pkg,EDS,EWPTE '16
ATX/MDM West '16
productronica,The ASSEMBLY Show, IMAPS, MDM/Minneapolis '15
Nepcon South China '15
SEMICON West '15
ATX/MDM EAST '15
EDS, SMT/Hybrid Pkg,Wire Tech Expo '15
SEMICON West '13
NEPCON China, SMT/Hybrid Pkg, EDS, NWPTE '14
Electronics West/MDM 10
ATX Midwest, IMAPS, PCB West '13
ATX West '14
ATExpo & IPC MW 07
NEPCON China '13, EDS, more
SEMICON WEST/Intersolar '12
Atlantic Design/MDM 10
Atlantic Design/MDM 09
NEPCON South China '13
ATExpo & IPC MW 08
Electronic West/MDM 09
SMTAI and productronica '13
AATE/IPC Midwest 10
SMTAI and productronica '13
Atlantic Design/MDM 08
Vitronics Soltec Intros PCB Warpage Compensation
Oosterhout, Netherlands — Vitronics Soltec now offers PC board warpage compensation as a feature of its advanced mySelective 6748 selective soldering machines. This compensation ensures that the points to be soldered on an assembly are always the same precise height above the wave, even if there ...
ACE Adds New X-Ray System to Development Lab
Spokane, WA — ACE Production Technologies, Inc. has added a FocalSpot FSX-075 high definition X-Ray system to the company's newly-formed Selective Soldering Process Development Lab. ACE selected the hardware based on ease of use, flexible inspection capabilities, and image capture quality. It is a high-resolution ...
Rehm Intros New Vacuum Vapor Phase Reflow
Blaubeuren, Germany — Rehm Thermal Systems is showing its latest developments in Vacuum Vapor Phase reflow with the launch of its VPS Condenso Vacuum system. The company is demonstrating the many advantages of the new technology, which is particularly effective for thermally demanding...
YXLON Intros Variofocus X-ray System
Hamburg, Germany — YXLON International is introducing Variofocus X-ray system with focal spot technology, a newly developed product offering extraordinary small, in-performance variable focal spot. The Variofocus System Y.XST225-VF closes the gap between microfocus and conventional X-ray tubes in digital radiography ...
Stereo Zoom Microscope from Vision Engineering
New Milford, CT — Vision Engineering has introduced its impressive new stereo zoom microscope, the SX45, for greater affordability without compromising optical performance. The instrument is the latest addition to the company's extensive range of stereo viewers...
Datapaq Intros Easy Oven Setup Software
Wilmington, MA — Datapaq is introducing its new Easy Oven Setup (EOS) software for reflow ovens. EOS is described as an easy-to-use software program that automatically calculates the best reflow oven settings based on the product and process limits. EOS uses a newly developed search engine to process...
TDK-Lambda Launches Isolated DC-DC Converters
San Diego, CA — TDK-Lambda has launched a new family of single and dual-output, 40-watt, DC-DC converters that operate from a 4:1 wide range input — making them suitable for applications where the input voltage can vary widely, including datacom...
Tyco Intros LED Light Pipes
Harrisburg, PA — New LED light pipe assemblies from Tyco Electronics provide a convenient and easy-to-use way to achieve accent lighting. With versions for both low- and high-intensity LEDs, the system uses a linear LED light source and a proprietary large-core optical fiber to project light the ...
Schleuniger Software Reduces Machine Downtime
Manchester, NH — Schleuniger, Inc. has introduced new software for fully automatic crimping machines. Significant increases in efficiency can be achieved with the company's new EASY ProductionServer software for CrimpCenter fully automatic crimping machines. The software can automatically sort and ...
OK Int'l: High Productivity Soldering Station
Garden Grove, CA — OK International has launched the highly anticipated MX-5000 Soldering, Desoldering and Rework System. Metcal systems provide easy usability and state-of-the-art ergonomics to reduce training requirements without compromising performance. The new soldering, desoldering and rework ...
Smallest RF Relays from Omron
Schaumburg, IL — Omron Electronic Components LLC has introduced the G6K-RF-S series of DPDT (2 form C) gull-wing SMD RF relays which take up only 10.7 x 8.6mm including terminals. The length was reduced by 17 percent when compared to previous versions. These relays handle 1A at 30VDC discrete load ...
Metris Laser Radar Automates Inspection
Brighton, MI — Metris has released Laser Radar Driver 5.1 software to set new precision standards for automated, non-contact inspection of holes in large measuring volumes. Depending on hole diameter, the system allows for accuracy and repeatability levels up to 30 times higher than before. Laser Radar's...
Mydata: Secure Traceability Software
Bromma, Sweden — Mydata has released the traceability software MYTrace. The fully automatic system gives users the ability to quickly and simply trace mounted components to printed circuit boards and in that way save both time and resources. According to the company, the system is easy to install and ready ...
Manncorp: Starter Lab Turnkey Line
Willow Grove, PA — Manncorp's "Starter Lab" turkey line is geared for production and training applications, and is widely used by contractors and OEMs who require low-cost precision prototyping or low-volume SMT assembly. It reportedly has also gained...
JTAG Technologies Intros New I/O Module
Stevensville, MD — JTAG Technologies has introduced the new compact JT 2149/MPV Digital I/O Scan (DIOS) module, which provides test access to PC boards requiring external I/O stimulus and response monitoring. The multi-programmable and multi...
Henkel Intros Self-filleting Die Attach Technology
Irvine, CA — Henkel has launched what it describes as breakthrough self-filleting die attach technology with a line of new Ablestik
brand die attach materials known as self-filleting die attach. The new class of die attach products offers all of the benefits of traditional die attach pastes, but
takes the adhesive technology further by incorporating a self-filleting mechanism.
JNJ Intros Protective Barrier Cream
Franklin, MA — JNJ Industries' new SafetySmart
Barrier Cream is a specially formulated, non-greasy skin protectant lotion that forms an invisible barrier on healthy skin. The cream incorporates a special moisturizing formula to soothe and moisturize dry, irritated skin while protecting workers ...
Thermal Interface Putty from Fujipoly
Carteret, NJ — Fujipoly America Corporation's Sarcon XR-Pe is a putty-like thermal interface material designed for broad ranging commercial and consumer electronics applications. This advanced material helps improve semiconductor performance by efficiently transferring unwanted heat to a nearby heat ...
Goepel Intros Boundary Scan Platform
Jena, Germany — Goepel electronic has introduced a new controller series compliant with PCI Express External Cabling specification, a new addition to the revolutionary JTAG/Boundary Scan hardware platform SCANFLEX
. The new family of Boundary...
CSZ Intros New Environmental Rooms
Cincinnati, OH — Cincinnati Sub-Zero (CSZ) has introduced its latest Stability Walk-in Rooms for mild temperature and/or humidity simulation. These environmental rooms are designed for stability testing, shelf life testing, package testing, consumer product testing, research and wherever mild temperature ...
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | email@example.com
powered by GIM