Save. Share. Connect.
Wednesday, July 27, 2016
VOLUME -23 NUMBER 12
Publication Date: 12/1/2008
Front Page News
People in the News
Electronic Mfg. Services
Electronic Mfg. Products
Special Feature: Test and Measurement
Product Preview: Electronic West / MDM
December 2008 Issue
Add Message Board
Aimtec Expands DIP 24 Power Supply Line
DIP 24 power supply.
Montreal, Quebec, Canada — Aimtec has expanded its DIP 24 product line with the launch of AM12T-Z and AM12TW-Z series of high power density DC-DC power supplies. Offered in wide 2:1 voltage ranges of 9 to 18VDC, 18 to 36VDC and 36 to 75VDC or in ultra wide, 4:1 input ranges of 9 to 36VDC and 18 to 75VDC.
The new power supplies provide high performance with distinctive and measurable advantages, including high power density that produces up to 12 Watts/in.
within a small footprint (31.75 x 20.32 x 10.16mm) which saves valuable PC board real-estate in comparison to alternative products with similar output power.
According to the company, the power supplies have exceptional thermal performance that eliminates the need for external thermal management solutions (Maximum case temperature is +57°C in standalone test at room temperature).
Outputs are self-protected; highly regulated and isolated (1600VDC) single and dual output of 2.5, 3.3, 5, 12, 15V, ±5V, ±12V and ±15VDC are fully protected against short circuit, over voltage and over current, with no minimum load required.
The supplies have high efficiency rates of up to 91 percent, soft start circuit and remote ON/OFF function make these power supplies an easy choice for portable power applications, where the combination of size, power density and efficient are critical. Units are CE approved for EMI standards EN55022 Class A, EN55024, EC61000-4-2, -4-3, -4-4, -4-5, -4-6 and -4-8 for use in a wide selection of regulated IT, industrial and telecom applications.
Contact: Aimtec Inc., 3883 Blvd. St-Jean, Suite 502, Dollard-des-Ormeaux, Quebec, Canada H9G 3B9
888-926-6832 or 514-620-2722 fax: 514-620-2725 E-mail: email@example.com Web:
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | firstname.lastname@example.org
powered by GIM