Save. Share. Connect.
Wednesday, February 22, 2017
VOLUME - NUMBER
ATX West and IPC APEX '17
SMTAI and IMAPS '16
SEMICON West '16
NEPCON China '15
ATX WEST/APEX '15
AATE and IPC MW 11
SMTAI, Autotest, ATX MW/MDM and Assembly '14
Electronics West/MDM and IPC/APEX '13
SEMICON West '14
IPC APEX '14
NEPCON China Product Preview '12
Electronics West/MDM 11
SEMICON WEST 10
Atlantic Design/MDM 11
ATLANTIC DESIGN & MFG '13
SEMICON WEST 08
Electronics West/MDM 08
NEPCON China Product Preview '13
Multi tradeshow Product Preview '12
Electronics West/MDM 12
ATE and IPC MW 09
NEPCON South China '16
Atlantic Design/ATX/MDM '16
NEPCON China,SMT/Hybrid Pkg,EDS,EWPTE '16
ATX/MDM West '16
productronica,The ASSEMBLY Show, IMAPS, MDM/Minneapolis '15
Nepcon South China '15
SEMICON West '15
ATX/MDM EAST '15
EDS, SMT/Hybrid Pkg,Wire Tech Expo '15
SEMICON West '13
NEPCON China, SMT/Hybrid Pkg, EDS, NWPTE '14
Electronics West/MDM 10
ATX Midwest, IMAPS, PCB West '13
ATX West '14
ATExpo & IPC MW 07
NEPCON China '13, EDS, more
SEMICON WEST/Intersolar '12
Atlantic Design/MDM 10
Atlantic Design/MDM 09
NEPCON South China '13
ATExpo & IPC MW 08
Electronic West/MDM 09
SMTAI and productronica '13
AATE/IPC Midwest 10
SMTAI and productronica '13
Atlantic Design/MDM 08
Add Message Board
ROHM Intros Line of H-Bridge Driver ICs
H-bridge driver ICs.
SAN DIEGO, CA — ROHM Electronics has introduced its complete line of H-bridge driver ICs offering designers a simple upgrade path to pulse-width modulation (PWM) speed control using either analog or digital inputs. The new BD62xx Series provides both a TTL-compatible interface to an external MCU as well as an internal VREF-PWM conversion circuit.
This allows implementation of energy-saving PWM control from an analog voltage input. The product line is offered in three maximum operating voltage classes — 7, 18 and 36V — with current ratings in each class of 0.5, 1.0 and 2.0A to cover applications ranging from portable electronics to automotive, appliance and medical devices.
BiCMOS topology is used to optimize performance and minimize power consumption. The P-channel/N-channel output configuration eliminates the need for an internal charge pump and external capacitors to operate the high-side switch. Internal shut-down circuitry reduces standby current to less than 1µA, particularly important in portable designs.
Pin-compatible packaging between the three voltage classes at each current level speeds design implementation while allowing for power optimization in lower-voltage applications. Two-channel versions offered at each voltage level are packaged with symmetrical pin-outs to simplify design and manufacturing.
In addition, the new family of ROHM PWM output H-bridge driver ICs are direct drop-in replacements for the company's legacy line of bipolar transistor output driver ICs.
All BD62xx H-bridge driver ICs include a complete suite of internal protection circuits including over-voltage protection (OVP), under-voltage lock-out (UVLO), over-current protection (OCP) and high-temperature shutdown (TSD). Overlap (shoot-through) protection to prevent high currents during motor reversal or breaking is also built in. In addition, the devices are designed to withstand 4kV ESD.
All products in the series come in low-profile surface-mount packages with maximum height ranging from 1.15mm (SSOP) to 2.2mm (HRP7). All devices are specified for -40 to 85°C operation.
Contact: ROHM Electronics USA, 10145 Pacific Heights Blvd., Suite 1000, San Diego, CA 92121
See at electronica Booth #A5.542.
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | email@example.com
powered by GIM