Save. Share. Connect.
Saturday, July 23, 2016
VOLUME - NUMBER
SEMICON West '16
Atlantic Design/ATX/MDM '16
NEPCON China,SMT/Hybrid Pkg,EDS,EWPTE '16
ATX/MDM West '16
productronica,The ASSEMBLY Show, IMAPS, MDM/Minneapolis '15
Nepcon South China '15
SEMICON West '15
ATX/MDM EAST '15
EDS, SMT/Hybrid Pkg,Wire Tech Expo '15
NEPCON China '15
ATX WEST/APEX '15
AATE and IPC MW 11
SMTAI, Autotest, ATX MW/MDM and Assembly '14
SEMICON West '13
Electronics West/MDM and IPC/APEX '13
SEMICON West '14
NEPCON China, SMT/Hybrid Pkg, EDS, NWPTE '14
IPC APEX '14
Electronics West/MDM 10
ATX Midwest, IMAPS, PCB West '13
ATX West '14
ATExpo & IPC MW 07
NEPCON China '13, EDS, more
SEMICON WEST/Intersolar '12
NEPCON China Product Preview '12
Atlantic Design/MDM 10
Electronics West/MDM 11
SEMICON WEST 10
Atlantic Design/MDM 11
ATLANTIC DESIGN & MFG '13
Atlantic Design/MDM 09
SEMICON WEST 08
NEPCON South China '13
ATExpo & IPC MW 08
Electronics West/MDM 08
NEPCON China Product Preview '13
Electronic West/MDM 09
SMTAI and productronica '13
Multi tradeshow Product Preview '12
AATE/IPC Midwest 10
Electronics West/MDM 12
ATE and IPC MW 09
SMTAI and productronica '13
Atlantic Design/MDM 08
HOME / CURRENT ISSUE
Add Message Board
JTAG Intros Rack-Mountable Instruments
JTAG test setup screen.
Stevensville, MD — JTAG Technologies has introduced its Rack-Mountable Instrument, JT 37x7/RMI — a fully-featured DataBlaster controller together with a front-end QuadPOD, packaged into a convenient form factor that's perfect for mounting in a standard 19-in. equipment rack. The four TAPs are easily accessed on the front panel of the RMI.
In addition to the TAPs, the front panel contains connectors for 256 programmable I/Os that can be used enhancing boundary-scan access on the target board or system. Clients can use the RMI with existing test sequencers, including the company's AEX or National Instruments TestStand, and whatever hardware platform they prefer.
The company also has available a new USB version of its low-cost 3705 Explorer, one of the first commercially available boundary-scan controllers. The new low-cost USB-powered controller has been developed to address the requirements of design engineers, SMEs (Small-Medium Enterprises) and low volume CEMs (Contract Electronic Manufacturers).
The original parallel port version of the 3705 Explorer has enjoyed a great success worldwide for over 10 years. The new USB version — still offers a fully functional boundary-scan controller with two TAPs (Test Access Ports) at low cost, but adds higher TCK rates and more voltage options than before in a highly compact form-factor.
The JT 3705/USB is powered from the USB interface making it portable and compatible with the burgeoning laptop population. It offers two TAPs (Test Access Ports) that can be fully synchronized for test purposes and is compatible with all JTAG Technologies' development tools such as JTAG ProVision and production packages such as the Stand-alone package (PSA) and the Production Integration Packages for LabVIEW, LabWindows, TestStand as well as C/C++ and Visual Basic.
The JT 3705/USB can be used for structural board testing, in-system device programming (ISP) of CPLDs, and in-system programming of small blocks of flash memory data etc. Programmable output levels per TAP (1.5V to 3.6 volts) make the JT3705/USB compatible with all current and future logic families. Test clock frequency may also be programmed from 100Hz to a brisk 6MHz allowing test applications to be executed quickly and easily.
Contact: JTAG Technologies, 1006 Butterworth Ct., Stevensville, MD 21666
877-367-5824 fax: 410-604-2108 E-mail: email@example.com Web:
See at electronica Booth #A1.221.
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | firstname.lastname@example.org
powered by GIM