Save. Share. Connect.
Thursday, September 29, 2016
VOLUME -23 NUMBER 9
Publication Date: 09/1/2008
Front Page News
People in the News
Electronic Mfg. Services
Electronic Mfg. Products
Special Feature: PCB and Assembly
Product Preview: ATExpo/IPC-MW
September 2008 Issue
Add Message Board
Etco: Custom Electronic Terminals
Custom dual-metal terminals..
Warwick, RI — Etco, Inc. has introduced a new stamping technology that combines two material thicknesses for forming electronic terminals and connectors which previously required multiple parts. Specialty Terminals with dual gauge materials can combine two functions that were previously unavailable in a single part, such as a rigid tab or connector with a formable "ear section" mating end.
Suitable for designing terminals and connectors incorporating multiple bends and forms, this technology saves metal, reduces labor, and eliminates multiple parts.
Allowing design engineers to specify parts 0.032-in. thick on one end and 0.016-in. thick at the other, the Specialty Terminals can be fabricated from virtually all alloys in sizes from 0.008-in. to 0.900-in. thick with ±0.002-in. tolerances, depending upon materials and design requirements.
Contact: Etco Inc., 25 Bellows St., Warwick, RI 02888
401-467-2400 fax: 401-941-2453 E-mail: firstname.lastname@example.org Web:
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | email@example.com
powered by GIM