Wednesday, December 7, 2016
VOLUME - NUMBER
Advertisements
Home/Current Issue >  Product Previews >  ATExpo & IPC MW 08 > 

Share

Seica Flying Prober Tests Both Sides at Once
Pilot V8 flying probe tester.
Strambino, Italy — The V8 is the latest addition to Seica's complete line of Flying Probe Test systems and represents a radical departure from traditional flying prober designs. The Pilot V8's vertical architecture enables high speed, high precision probing on both sides of the UUT simultaneously, offering the maximum in test coverage and flexibility in a compact, ergonomic package.

The flying prober is equipped with eight electrical flying test probes (four on each side), two Openfix capacitive and two power flying probes, plus two CCD cameras (one on each side).

With 14 mobile resources available to test the UUT, Pilot V8 has a range of in-circuit and functional test capabilities. In addition, like other of the company's flying probe solutions, the new machine can implement a series of net-oriented measurement techniques, based on measurements executed on the board signal nets. These new test methods cut the time required for in-circuit test by lowering the number of measurements required, maintaining the same level of fault coverage and valuable diagnostic information.

The mobile power probes are another innovation that enables the power-up of the UUT without requiring additional fixed cables. The system can also execute parallel tests on two UUTs at the same time, effectively doubling test capacity when compared to a four-probe system.

This system, along with all other of the company's systems runs on the powerful VIP software platform, which optimizes test-program development time, test time and fault coverage while providing a common software architecture across all its products, supporting seamless migration between different test strategies and systems. This strategy has numerous advantages for the user, not least of which is the elimination of the need to re-train test technicians, who continue to operate in the same software environment, where program development is guided in a simple 3-step process; a series of automated operations literally do what is needed to get test programs up and running quickly in an intuitive, self-explanatory environment.

Contact: Seica Inc., 50A Northwestern Drive, Suite 10, Salem, NH 03079 603-890-6002 fax: 603-890-6003 Web:
http://www.seica.com


Share

 
 
search login